Warnings And Notes; Connecting Cables - Alcatel-Lucent 7705 Installation Manual

Connecting Cables

Warnings and Notes

Dangers:
•
•
•
Warnings:
•
•
•
Note: Services cannot be configured until the ports are configured.
Page 82
Only trained and qualified personnel should install or replace this equipment.
Use of procedures other than those specified in this Installation Guide can result in
hazardous radiation exposure.
Invisible laser radiation can be emitted from an optical port aperture when no cable is
connected. Avoid exposure and do not stare into open apertures.
Electrostatic discharge (ESD) damage can occur if electronic components are
mishandled. Always wear an ESD-preventive wrist or ankle strap and always connect an
ESD strap to a nearby ground point that is connected to the site grounding point when
working on the 7705 SAR-F. Typical ground points include the ground connection point
on the front of the 7705 SAR-F, the grounding stud on the 7705 SAR-F mounting bracket,
or a properly grounded rack or work bench.
Always place components on an anti-static surface.
Use only approved small form-factor pluggable (SFP) fiber-optic devices in a
7705 SAR-F.
7705 SAR-F Installation Guide