Table of Contents
Advertisement
4.2.3. Installation of the cylinder assemblies
WARNING : When assembling the cylinders, it is imperative that the cylinder rods are extended
and that the flaps are in a horizontal position.
Step 1: Install the elbow fitting (2) on the cylinder
(1).
Step 2: Secure the swivel flange (3) on the cylin-
der (1) with 4 screws M6 x 20.
Step 3: Join the second flange (5) to the first one
by a shaft (4) and lock it with two clips.
Step 4: Attach the support (6) to the flange (5)
with 4 M6 x 20 bolts with nuts and washers.
Step 5: Install the elbow fitting (3) on the cylinder
(4).
Step 6: Screw the rod cover (2) onto the cylinder
rod.
Step 7: Fit the rotation rod (1) on the cover plate
(2) by locking the cover shaft.
Step 8: Fasten the cylinder assembly mounted on
the box (3) by fixing the rotation rod (2) on the
support (1) with a M10 x 25 screw.
Step 9: Fasten the bracket (4) to the housing (3)
with 4 screws M8 x 20.
Step 10: Repeat the operation for the second
cylinder assembly.
Index revision : A
22
1
2
3
4
5
6
1
2
3
4
1
2
3
4
7143
Advertisement
Table of Contents
