Table of Contents
Advertisement
Other necessary tools and accessories:
The tools listed below are recommended for installation and maintenance of the equipment.
• Flat and Phillips screwdriver.
• Torque wrenches.
• Allen wrenches.
• Flat wrench.
• Multi-socket pliers.
• Spirit level.
• Bracket with a minimum length of 1 meter.
• Screw machine with tips
• Gazelle stepladder.
4.2. Installation
WARNING : These assembly procedures must be carried out by at least two authorized persons.
4.2.1. Installation of the bottom box
WARNING : It is imperative to make sure that the centerline of the box is aligned with the
conveyor axis and that the orientation of the box (ventilation ducts located at the rear of the
booth) respects the diagram below:
Front face
Conveyor direction
Index revision : A
19
Back face
7143
Advertisement
Table of Contents
