ABB SPAC 315 C User Manual And Technical Description page 57

Data
Interlocking and Conditional Direct
Output Control program
(format; operation, operand)
Event delay; —>10 (open)
Event delay; —>01 (close)
Event delay; —>11 (undefined)
Event delay; —>00 (undefined)
Use of input 7
Operation principle of input
channels 4...13
Signal output activation via
input channels 4...13
Channel Code Data
direction
0 M200 RW(e)
:
M300
1...3 S10 RW(e)
1...3 S11 RW(e)
1...3 S12 RW(e)
1...3 S13 RW(e)
7 S1 RW(e)
4...13 S2 RW(e)
4...13 S3 RW(e)
Values
Commands =
LOAD, LOADN
AND, ANDN
OR, ORN
OUT
END
Interlocking variables =
status closed (1...3)
or active (4...13)
status undefined
(101...103)
status open (201...203)
Output code (20, 21)
Special register (60, 61)
L/R key switch position
information (62)
Memory No. (70...89)
Variables for Conditional
Direct Output Control =
status closed (1...3) or
active (4...13)
status undefined
(101...103)
status open (201...203)
Output code (22...25,
220 or 221)
Special register (60, 61)
L/R key switch
position (62)
Memory No. (70...89)
0.00, or 0.02...60.00 s
0.00, or 0.02...60.00 s
0.00, or 0.02...60.00 s
0.00, or 0.02...60.00 s
0 = general mode
1 = pulse counter without
indication
2 = pulse counter with
indication
0 = active at low state
1 = active at high state
0 = no SIGNAL output
activated
22 = SIGNAL1 output
activated
23 = SIGNAL2 output
activated
24 = SIGNAL3 output
activated
25 = SIGNAL4 output
activated
31