ABB SPAC 315 C User Manual And Technical Description page 15

Terminal numbers:
Terminal Terminal Function
block number
X2 1-5
2-5
3-5
4-5
6-7
8-14
9-14
10-14
11-14
12-14
13-14
X3 1-2
3-4
The channel numbers mentioned above are
used when the control module SPTO 1D6 is to
be configured. When the control module is
Output Terminal numbers
OPEN X0/66-97
OPEN X0/65-96
CLOSE X0/86-99
CLOSE X0/85-98
SIGNAL 1 X1/10-11
SIGNAL 2 X1/8-9
SIGNAL 3 X1/6-7
SIGNAL 4 X1/4-5
Input CHANNEL 4
Input CHANNEL 5
Input CHANNEL 6
Input CHANNEL 7 or energy pulse counter input
Input CHANNEL 8 or blocking input for the protection module
Input CHANNEL 1, open status. E.g. when a circuit breaker is open
the input must be energized
Input CHANNEL 1, closed status. E.g. when a circuit breaker is
closed the input must be energized
Input CHANNEL 2, open status
Input CHANNEL 2, closed status
Input CHANNEL 3, open status
Input CHANNEL 3, closed status
mA input for the measurement of active power
mA input for the measurement of reactive power
Output code
for interlocking
20
20
21
21
22
23
24
25
configured the following codes are used for the
outputs:
Output code for Conditional
Output Control
220
220
221
221
22
23
24
25
15