ABB SPAC 315 C User Manual And Technical Description page 54

Serial communica-
tion parameters
(modified 96-02)
28
Apart from the event codes the substation level
data communicator is able to read, over the SPA
bus, all input data (I data) of the module, set-
ting values (S data), information recorded in the
Data
Current on phase L1 (x I
Current on phase L2 (x I
Current on phase L3 (x I
Active power (bits)
Reactive power (bits)
Current on phase L1 (A)
Current on phase L2 (A)
Current on phase L3 (A)
Undelayed status of trip
circuit supervision input
Undelayed status of the energizing
current monitoring
Object status
Closed status of an object
Open status of an object
Status of input channels 4...13
Direct output control
Trip circuit supervision alarm
Energizing input monitoring alarm
Open select
(secured operation)
Close select
(secured operation)
Execute selected open/close
operation
Cancel selected open/close
operation
Open pulse length
Close pulse length
Execute selected open/close
operation (common address 900)
Cancel selected open/close
operation (common address 900)
Channel Code
) 0
n
) 0
n
) 0
n
0
0
0
0
0
0
0
1...3
1...3
1...3
4...13
1...3
0
0
1...3
1...3
1...3
1...3
1...3
1...3
0
0
memory (V data), and some other data. Fur-
ther, part of the data can be altered by com-
mands given over the SPA bus.
Data Values
direction
I1 R 0.00...2.50 x I
I2 R 0.00...2.50 x I
I3 R 0.00...2.50 x I
I4 R -1023...1023 bits
I5 R -1023...1023 bits
I6 R 0...9999 A
I7 R 0...9999 A
I8 R 0...9999 A
I9 R 0 = deactivated
1 = activated
I10 R 0 = input states normal
1 = current input(s) faulty
I1 R 0 = undefined (inputs 00)
1 = closed
2 = open
3 = undefined (inputs 11)
I2 R 0 = not closed
1 = closed
I3 R 0 = not open
1 = open
I1 R 0 = not active
1 = active
O1 W 0 = open
1 = close
O9 R 0 = alarm reset
1 = alarm active
O10 R 0 = alarm reset
1 = alarm active
V1 RW 0 = no selection
1 = select
V2 RW 0 = no selection
1 = select
V3 W 1 = execute selected
V4 W 1 = cancel selected
V5 RW(e) 0.1...100.0 s
V6 RW(e) 0.1...100.0 s
V251 W 1 = execute all selected
V252 W 1 = cancel all selected
n
n
n
operation
operation
operations
operations