Table of Contents
Advertisement
Operational Instructions and Function Adjustment
Result
Select this option to view the results of the last five calibrations or validations. The
results include Pass, Fail, Canceled, and Error. The system use duration at the time
of calibration or validation is recorded.
Note
To cancel automatic calibration, press j and select Cancel.
If you select automatic calibration or validation within less than 20 minutes after the LCD monitor
is powered on, the message "Power-on in progress" appears. It is recommended that automatic
calibration or validation be performed about 30 minutes after power-on when the LCD monitor is
in the optimal state.
During automatic calibration or validation, avoid excessive ambient light.
User Menu – Monitor Settings
In the power-on state, the Monitor Settings menu provides the Language, LOGO, Signal Input,
and Monitor Info items.
Procedure:
1) Press the
button on the LCD monitor to go to the
User menu.
2) Press ▲/▼ to select the
Monitor Settings menu on the right.
3) Press ▲/▼ to select the item to be adjusted, and press
to go to the next menu.
4) In each menu, press ▲/▼ to select an option.
5) Press
to return to the previous menu.
Menu Location
Set Menu Location to position menus. The options include Upper Left, Bottom Left, Upper
Right, Bottom Right, and Center. The default value is Bottom Right.
Language
Set Language to select a language for menu display.
The options include Chinese and English. The default value is Chinese.
icon. Press
to go to the
19
User menu
Menu Location
Language
LOGO
Signal Input
Monitor Info
All Settings Reset
User menu
Monitor Settings
Upper Left
Chinese
On
Auto
Advertisement
Table of Contents
