Hisense HMD3C21S User Manual page 24

Operational Instructions and Function Adjustment
LOGO

Set LOGO to enable or disable the startup logo.

When you select Off, the startup logo is not displayed upon power-on. When you select On, the
startup logo is displayed upon power-on. The default value is On.
Note

The startup logo is displayed only when the LCD monitor is shut down in AC mode and restarted.
Signal Input

Set Signal Input to select an input signal format.

The options include Auto, DVI, and DP, each of which corresponds to a signal input channel. The
default value is Auto.

Select DVI or DP to switch to the corresponding signal input channel.

After you select Auto, the system automatically identifies the signal input channel.
Note

The LCD monitor automatically enters sleep mode when it detects no output signals for several
seconds, and the power indicator lights on in orange.

While the LCD monitor is in sleep mode, the system automatically wakes up display when
detecting an input signal.

After you select Auto, if the LCD monitor is connected to both DVI and DP channels, DVI input is
used by default. To switch to the DP channel, select the DP option.
Monitor Info

Tap Monitor Info to view the basic monitor model, resolution, serial number, firmware version,
product use duration, and backlight use duration.
All Settings Reset

Tap All Settings Reset to set all menu parameters to the default settings.
Note

After you press OK, all menu parameters are restored to the default settings.
20