Function; Limitations Of Use - BRAND accu-jet S Operating Manual

8. Use only original accessories and replacement parts. Do not make
any technical modifications. Do not dismantle the instrument any
further than is described in the operating manual!
9. Always check that the instrument is in proper working condition be-
fore use. If an instrument fault is signaled, stop pipetting immedi-
ately and follow the instructions in the section Troubleshooting.
Contact the manufacturer, if necessary.
10. Use only the original power adapter to charge the nickel-metal hy-
dride battery.
11. Do not use batteries from other manufacturers.
12. Protect the power adapter from moisture and use it only with this in-
strument.
13. Stop using the power adapter if the connection cable is damaged.
14. Only authorized service technicians are permitted to carry out re-
pairs and internal maintenance on the instrument.

2.1 Function

The device serves as an aid for pipetting liquids with graduated and volu-
metric pipettes made of glass or plastic in the volume range from 0.1 ml
to 200 ml and with a suction tube outer diameter < 9.2 mm. When the de-
vice is handled correctly, the pipetted liquid comes into contact with the
pipette only.

2.2 Limitations of use

This device is intended for pipetting liquids within the following physical
limitations:
• from 10 to 40°C (from 50 to 104°F) (device and reagent)
• vapor pressure up to 500 mbar. Absorb slowly above 300 mbar in or-
der to prevent the liquid from boiling.
• Density up to 9 g/cm
9974 18
3
2 Safety
Operating manual
37