Table of Contents
Advertisement
6
Specifications
6-1.
Specifications
UTMⅡ interface
DC-input for torque
Input resistance
Signal input range
Non-linearity
Zero drift
Gain drift
Analog filter
Sampling speed
A/D resolution
Pulse input for rotation speed (open collector input)
Maximum input frequency
Minimum input frequency
Minimum detected pulse range
Circuit configuration
Drive power supply for UTMⅡ
Power supply voltage
Display section
Status display
41
1MΩ
±5V
0.02％/F.S.±1digit
0.2mV/℃ RTI or less
0.01％/℃ or less
First-order low-pass filter (-6dB/oct)
Fixed at 1k Hz
300 times/second
24 bit binary
Approx. 1/30000 against 5V
According to the output frequency of the UTMⅡ series
15, 10, 5, 3, 2 rpm selectable
60, 40, 20, 12, 8 rpm selectable
50μs
No-voltage contact input (minus common)
Open collector can be connected (Ic = approx. 10mA)
DC24V * Up to one unit of UTMⅡ
LED (red):
Power supply/alarm
LED (green):
UTMⅡ in operation
6 Specifications
* Pulse rate: 4 pulses
* Pulse rate: 1 pulse
41
Chapter
6
Advertisement
Table of Contents
