Table of Contents
Advertisement
3-3.
Menu
File
From the file menu, saving and opening the waveform data and printing the screen can be
performed.
Save(S)
The setting of waveform display scale is overwritten on the file of the waveform data currently
shown.
Save as(A)
The waveform data currently shown is saved with a new file name.
Thin out and save(T)
The acquired waveform data is thinned out and
saved as a new file.
The original waveform file is not modified.
When this menu is selected, the screen on the
right is displayed.
When x is specified in the range of 2 to 300 and
"OK" is clicked, a file name can be input.
Once the file name is input, the file whose
number of data is 1/x is created and saved.
e.g.) The number of data and data number of the file to be saved (n = 0, 1, 2, 3 ...)
Original file
300 samples/second
When x = 2,
150 samples/second
When x = 50,
6 samples/second
When x = 300,
1 sample/second
Waveforms of the file thinned out and saved cannot be displayed with the PC application.
9
first, second, third, ... nth
first, third, fifth, ... 2n+1th
first, 51st, 101st, ... 50n+1th
first, 301st, 601st, ... 300n+1th
3 Setting Procedures
9
Chapter
3
Advertisement
Table of Contents
