Table of Contents
Advertisement
5 Function Description Related to Indicated Values
5-4.
Digital low-pass filter
This function is a low-pass filter (allowing only signals below specific frequency to pass and
attenuating signals above the frequency) that performs digital filter processing against the
converted data and cancels unnecessary noise. The higher the cut-off frequency, the quicker the
response, but noise may also be displayed. This filter can be set to torque.
■ Execution procedure
Chapter
5
40
40
<Setting value>
3, 30, 300, Off [Hz]
1.
Switch the PC application screen to
the "Settings" tab.
2.
Select the cut-off frequency of the
digital low-pass filter.
3.
When writing setting values to the
TM201, click the "Set" button.
4.
When the "Set" button is clicked, a
confirmation dialog to overwrite is
displayed, and click "Yes (Y)".
Advertisement
Table of Contents
