Table of Contents
Advertisement
Digital zero
Digital zero or digital zero reset is performed against torque.
Refer to P.38 "5-2.Digital zero" for details.
Cursor
Cursor can be displayed after waveform data is acquired or when history waveform is shown.
(3)
(1) Cursor display selection
When cursor 1 is checked, the first cursor is displayed and cursor 2 can be checked.
When cursor 2 is checked, the second cursor is displayed and lock can be checked.
When lock is checked, the range between the two cursors is locked.
The two cursors can be moved with the range fixed.
(2) Cursor position
The current position of the cursor is displayed as time.
t1 represents time of cursor 1.
Δt represents time interval between cursor 1 and cursor 2, and with which, cycles and so on can
be checked.
1/Δt is a reciprocal of Δt, and with which, frequencies and so on can be checked.
(3) Data value
Each data value at the positions of cursor 1 and cursor 2 as well as the difference (Δ) are
displayed.
15
(1)
(2)
3 Setting Procedures
(3)
(3)
Chapter
3
15
Advertisement
Table of Contents
