Table of Contents
Advertisement
3 Setting Procedures
3
Setting Procedures
3-1.
USB interface
This USB interface allows the TM201 to be used in the dedicated PC application, such as retrieving
the torque, rotation speed and power of UTMⅡ, writing setting values into the TM201 and so on.
Chapter
Communication specifications
3
Communication standard
Connector
3-2.
PC preparation
Please make sure to install USB drive and PC application prior to connecting TM201 to the PC for
the first time.
PC operating environment
OS
Display
USB port
USB driver
USB driver installation
Online network to perform automatic installation of driver.
Please go online network.
The driver automatically downloaded and installed via the network when TM201 connected to PC
with the USB cable.
In case of failing driver installation or not starting of PC application software, you delete the USB
driver and reconnect to PC. Please try again.
If it doesn't automatically perform installation, see the homepage of FTDI.
Guide
Driver
USB connection
Following the installation procedures, connect the USB cable included to the PC.
The USB connector of the TM201 is mini-B TYPE.
6
6
USB Ver.2.0 compliant, full speed (12Mbps)
mini-B TYPE
Windows7
800×600 pixel or above
One or more free ports
Virtual COM Port (VCP) Drivers (developed by FTDI Limited)
http://www.ftdichip.com/Support/Documents/InstallGuides.htm
http://www.ftdichip.com/Drivers/VCP.htm
CPU
Core i3 2GHz or above
Memory
2GB or above
Hard disk
15GB free space or more
Advertisement
Table of Contents
