Table of Contents
Advertisement
Check of virtual COM port
After installing this USB driver, connect the
TM201 with the USB cable.
Next, check the virtual COM port number to
which the TM201 is connected from the
Device Manager of the PC.
Device Manager can be opened by double-
clicking
the Device Manager in "Control Panel" from
the Start menu.
Installation of the dedicated PC application
Download and install the dedicated PC application from the UNIPULSE website. To download the
application, user registration (free) is required.
* http://www.unipulse.com/en/products/TM201.html
7
Key points
If the COM port number of the TM201 cannot be determined due to multiple USB
Serial Ports and so on, unplug the USB cable once and confirm that one COM
port is removed from the list of ports (COM and LPT). When the USB cable is
reconnected to the previous connector, the number of COM ports displayed in
the list increases. This number represents the COM port number of the TM201.
Operation manual
Download the compressed file to the PC from the download page
Extract the compressed file on the PC and start up the installer
Follow the procedure and complete the installation
3 Setting Procedures
Virtual COM port number
Dedicated PC application
Chapter
3
7
Advertisement
Table of Contents
