Turn-On Of Power Supply; Startup Of Pc Application; Specification Of Com Port - Unipulse TM201 Operation Manual

3 Setting Procedures

Turn-on of power supply

When connected to the PC with the USB cable, the power of the TM201 turns on.

Startup of PC application

Double-click the shortcut of the TM201 on the desktop or click
"UNIPULSE"→"TM201"→TM201 from the Start menu.

Specification of COM port

Select the virtual COM port checked in the
Chapter
Device Manager of the PC on the start
3
screen, click the "OK" button, and the PC
application starts up.
Once the PC application starts up,
the ALM lamp of the TM201 lights off.
If the lamp is a slow flash, check that power is supplied from the AC adapter, and if the lamp lights
on, check that the virtual COM port of the TM201 has been properly selected in the PC application.
* If the number of enabled COM ports is one, the PC application starts up without displaying this
8
8
selection screen.
Shortcut