Exiting Procedure; Pc Application Exiting; Cable Removal - Unipulse TM201 Operation Manual

3 Setting Procedures
3-8.

Exiting procedure

PC application exiting

Click "File" → "Exit" from the menu, a confirmation dialog
appears, and click "OK".
If the ALM (red) lamp of the TM201 main unit lights off and
then lights on, it shows that the PC application has exited.

Cable removal

Chapter
3
24
24
1.
Remove the AC adapter from the outlet.
2.
Confirm that the PC application has exited, and remove the USB cable from the PC
and the TM201.
3.
Remove the cable and AC adapter connected to UTMⅡ.
(There is no need to use the "Remove Hardware Safely" feature to disconnect the
USB cable of the TM201 from the PC.)