Table of Contents
Advertisement
3-4.
Waveform tab
Various indicated values such as torque, rotation speed and power as well as waveform data are
acquired and displayed.
Waveform tab
(5)
(1) Cursor display switch
Cursor display can be selected after waveform data is acquired or when historical data is shown.
(2) Waveform
Torque, rotation speed and power waveform are displayed from the upper section respectively.
(3) Indicated values
Current indicated values of the torque, rotation speed and power as well as the maximum,
minimum and average values of the waveform data are displayed from the upper section
respectively.
(4) Setting conditions for waveform acquisition
Settings related to the waveform display and data acquisition can be performed.
Refer to P.12 "Setting conditions for waveform acquisition" for details.
11
(1)
(2)
3 Setting Procedures
(4)
(3)
(6)
Chapter
3
11
Advertisement
Table of Contents
