Display Functions - Eaton 5PX Advanced User's Manual

4.3 Display functions

Press the Enter ( ⮠ ) button to activate the menu options. Use the two middle buttons (⯅ and ⯆) to scroll through the
menu structure. Press the Enter (⮠ ) button to select an option. Press the (ESC) button to cancel or return to the previous
menu.
Menu map for display functions
Main menu Submenu
Measurements -
Load Segments
Start battery test
Control
Change battery
Connectivity test
Functions reset
Local settings
Input / output
settings
Settings ON / OFF settings
Battery settings
Communication
settings
View alarms
View events
Event log
View all
Reset all
View fault
Fault log
Reset faults
614-40094-00
Display information or Menu function
Load: [Total Load/Load (Primary)/Load (Group 1)/Load (Group 2)] : W, A, VA, pF
[Input/Output] : V, f
[Efficiency] : %
[Battery Info] : %, min, V, number of EBM, Age service, Age Warning
[Average power usage] : Toal, Primary, Group 1, Group 2
[Cumulative power] : Total, Since Primary, Since Group 1, Since Group 2
Group 1: ON / OFF
Group 2: ON / OFF
These commands overrule user settings for load segments.
Starts a manual battery test (possible if load >20% and battery >80%)
Disable charger, Replace battery, Update settings
Dry contacts test, Relay card test, Line failure test, Battery low test
Reset fault state, Reset power usage, Reset battery life, Card reset, Restore
factory settings
Sets product general parameters, see
Sets input and output parameters
Sets ON / OFF conditions
Sets battery configuration
Sets communication parameters (input/output signals, remote signals, IPV4
address)
Displays the alarms stored
Displays the events stored
Displays the faults and events stored
Clears the faults and events stored
Displays the faults stored
Clears faults
User settings
18