Table of Contents
Advertisement
The following table describes the status information provided by the UPS
Note: If other indicator appears, see the troubleshooting for additional information.
Table 4. LCD Operating Status
Operation status
Standby mode
Online mode
Battery mode
End of backup time
High Efficiency mode
Bypass mode
2 2 . . 6 6
D D i i s s p p l l a a y y F F u u n n c c t t i i o o n n s s
Press the (
the menu structure. Press the (
previous menu.
Table 5. Display Functions
Main menu
Measurements
Control
Cause
The UPS is Off, waiting for startup
command from user.
The UPS is operating normally.
A utility failure has occured and the UPS
is on Battery mode.
The UPS is on Battery mode and the
battery is running low.
The UPS is operating on High Efficiency
mode.
An overload or a fault has occurred, or a
command has been received, and the
UPS is in Bypass mode.
) button to activate the menu options. use the two middle buttons (
) button to select an option. Press the ESC button to cancel or return to the
Submenu
Go to Bypass
Description
Equipment is not powered until
button is pressed.
The UPS is powering and protecting the
equipment.
The UPS is powering the equipment with
the battery power. Prepare your
equipment for shutdown.
Low Battery Warning settings:
[Capacity] [0%] ... [100%]
[Runtime] [0mn] ... [60mn]
The alarm triggers when the set
percentage of battery capacity or
remaining back-up time is reached.
The UPS is powering and protecting the
equipment
Equipment is powered but not protected
by the UPS.
Display information or Menu function
[Load] W VA A pf / [Input/Output] V Hz /
[Efficiency] % / [Battery] % min V n°
EBM / [Battery remaining life] months /
[Average power usage] Wh / [Cumulated
power] Wh / BMS Information
Transfers the UPS on Bypass mode
Eaton 9PX Lithium-Ion
P-164001006—Rev 01
Display Functions
and
) to scroll through
7
Advertisement
Table of Contents
