User Settings - Eaton 5PX Advanced User's Manual

4.4 User settings

The following table displays the options that can be changed by the user.
Submenu
Language
Date / time
LCD
Local
settings
Audible
alarm
Protected
access
Output
voltage
Input
thresholds
In/Out
settings
Sensitivity
Load
segments
Overload
prealarm
ON/OFF
settings
Start/Restart
614-40094-00
Available settings
[English] [Français] [Deutsch] [Español] [Русский]
[Português] [Italiano] [Simplified Chinese] [Japanese]
Menus, status, notices and alarms, UPS fault, Event Log
data and settings are in all supported languages.
Format: [International] [US]
Modify LCD screen brightness and contrast to be adapted
to room light conditions.
[Enabled] [Disabled on battery] [Always disabled]
Enable or disable the buzzer if an alarm occurs.
Level: [0-8]
[Enabled] [Disabled]
Allow the user to lock the settings modification. Password
is: 0577
[200 V] [208 V] [220 V] [230 V] [240 V]
[Normal] [Extended]
Extended mode authorises lower input voltage (150V) with
out transferring to battery.
This can be used if the load can withstand low voltage
supply.
[High] [Low]
Low sensitivity extend the range of input frequency
accepted before transferring to battery.
[Auto start delay]
[Auto shutdown delay]
[10%] ... [105%]
Load % when overload alarm occurs
[Cold start]
[Auto restart]
[Auto start]
Default settings
English
Automatic message for user
configuration when UPS is
powered for the first time.
[International]
[0]
[Enabled]
[6]
[Disabled]
[230 V]
[Normal]
[High]
UPS:[No delay]; Group1:[3s];
Group2:[6s]
UPS:[Disabled]; Group1:
[Disabled]; Group2:[Disabled]
[105%]
[Cold start] : ON
[Auto restart] : ON
[Auto start] : OFF
20