Jacking And Tire Changing - If Equipped; Jump Starting - Chrysler Pacifica Hybrid 2020 Owner's Manual

Table of Contents

Advertisement

Cavity
Cartridge Fuse
F99
F100A
F100B
CB1
CB2
CB3
* 30A mini fuse is substituted for 25A Circuit Breaker.
JACKING AND TIRE
CHANGING — IF EQUIPPED
Your vehicle is not equipped with a jack or
spare tire. If the vehicle tire cannot be
re-inflated, using the portable air compressor
with sealant provided with the vehicle, then
towing of the vehicle may be necessary.

JUMP STARTING

The vehicle requires its 12V battery power to
"turn-on" the vehicle's high voltage battery.
The high voltage battery is used to charge the
12V battery, provide electric vehicle opera-
tion, and to start the vehicle's gas engine. If
the 12V battery has been discharged, the
Blade Fuse
10 Amp Red
25 Amp
25 Amp
vehicle can be jump started using a set of
jumper cables and a battery in another
vehicle or by using a portable battery booster
pack.
If the vehicle's high voltage battery has also
been discharged, it will need to be recharged
before the vehicle can be started:
If the vehicle can be connected to a Level
1 or Level 2 charger where it is currently
parked, the vehicle will still require a jump
start to allow the vehicle to begin the
battery charging process. Once the vehicle
charging has begun (indicated by the
charge status indicator on top the vehicle's
instrument panel), the jumper cables can
be removed from the vehicle jump posts.
Not Used
QVPM
Rr Camera / LBSS / RBSS / CVPM / Humidity Snsr / In Car Temp Snsr
Circuit Breakers
Power Seat (Driver)
Power Seat (Pass)*
Not Used
Description
If the vehicle cannot be connected to a
Level 1 or Level 2 charger where it is
currently parked, the vehicle can be moved
by connecting 12V power to the vehicle's
jump posts and then shifting the transmis-
sion from PARK (P) into NEUTRAL (N).
Power provided by the jumper cables will
also allow the Electric Park Brake to be
released. Carefully move the vehicle to a
Level 1 or Level 2 charge location. While
the vehicle is being moved, the external
12V power must remained connected to
the vehicle jump posts.
NOTE:
Be careful when moving the vehicle - ensure
that control of the vehicle is maintained.
81

Advertisement

Table of Contents
loading

Table of Contents