Keysense Cluster Messages - If Equipped; Instrument Cluster Display Menu Items - Chrysler Pacifica Hybrid 2020 Owner's Manual

NOTE:
If the vehicle enters Fuel and Oil Refresh
Mode to maintain engine lubrication, adding
fuel will not exit the mode sooner.
If the vehicle enters Fuel and Oil Refresh
Mode to maintain engine lubrication proper-
ties, the engine may run for a period of up to
20 minutes when fully warm whenever the
vehicle is operational (no electric only opera-
tion). If the vehicle is shut down before
conditions to exit the refresh mode have been
satisfied, the engine may run for additional
time on subsequent trips.
NOTE:
Frequent short trips at low ambient tempera-
ture conditions are more likely to trigger the
lubrication based mode.
KeySense Cluster Messages — If Equipped
When the KeySense key is in use
there will be:
Continuous, dedicated telltale

Unique Display Splash Screen

32
With KeySense in use there will be multiple
associated messages shown in the following
table:
Instrument Cluster
Setting
Display Message
None – With vehicle "KeySense in use.
ignition ON Max vehicle speed
set to xx MPH/or
km/h"
Max Vehicle Speed "Max speed

reached.
KeySense in use"
supported by a
chime
"Approaching

max speed xx
MPH/km/h"
supported by a
chime
Start Up Fuel Alert "Range to empty xxx
message miles or km"
Early Low Fuel Alert "Fuel Low"
Message
Instrument Cluster
Setting
Display Message
ParkSense "Feature cannot be
disabled. KeySense
in use"
Blind Spot "Feature cannot be
disabled. KeySense
in use"
Forward Collision "Feature cannot be
Warning disabled. KeySense
in use"

Instrument Cluster Display Menu Items

NOTE:
The Instrument Cluster Display menu items
display in the center of the instrument
cluster. Menu items may vary depending on
your vehicle features.
Speedometer
Push and release the up or down arrow button
until Speedometer is highlighted in the instru-
ment cluster display. Push and release the OK
button to toggle between mph and km/h.