Table of Contents
Advertisement
WARNING!
Driver inattention could lead to failure to
place the vehicle in PARK. ALWAYS DO
A VISUAL CHECK that your vehicle is in
PARK by verifying that a solid (not
blinking) "P" is indicated in the instru-
ment cluster display and near the gear
selector. If the "P" indicator is blinking,
your vehicle is not in PARK. As an added
precaution, always apply the parking
brake when exiting the vehicle.
AutoPark is a supplemental feature. It is
not designed to replace the need to shift
your vehicle into PARK. It is a back up
system and should not be relied upon as
the primary method by which the driver
shifts the vehicle into PARK.
ALWAYS DO A VISUAL CHECK that your vehicle
is in PARK by looking for the "P" in the
Instrument Cluster Display and on the
shifter. As an added precaution, always apply
the parking brake.
If the vehicle is not in PARK and the driver
attempts to turn off the engine, if certain condi-
tions are met, the vehicle will AutoPark, auto-
matically shifting the vehicle's transmission to
the PARK position. The rotary shifter will auto-
matically reset itself to the PARK position. The
vehicle's ignition will then move to the OFF posi-
tion (Engine OFF). When AutoPark is activated
the instrument cluster will display the message
"AutoPark Engaged"
AutoPark will engage when all of these condi-
tions are met:
Vehicle is equipped with a rotary selector
Vehicle is not in PARK
Vehicle speed is 1.2 mph (1.9 km/h) or
less
Driver has pushed the ENGINE START/
STOP BUTTON
If the vehicle is not in PARK and the driver exits
the vehicle with the engine running, if certain
conditions are met, the vehicle will AutoPark,
automatically shifting the vehicle's transmis-
sion to the PARK position. The Electric Park
Brake SAFE HOLD feature will also activate in
some conditions. Please reference SAFE HOLD
pages for additional information regarding this
function.
CAUTION!
Engine will remain running.
AutoPark will engage when all of these condi-
tions are met:
Vehicle is equipped with a rotary selector
Vehicle is not in PARK
Vehicle speed is 1.2 mph (1.9 km/h) or
less
Driver's door is ajar
Driver's seat belt is unbuckled
Brake pedal is not depressed
The MESSAGE "AutoPark Engaged" will
display in the instrument cluster.
AutoPark In Stop/Start Autostop Mode
AutoPark will engage when all of these
conditions are met:
Vehicle is equipped with a rotary shifter
Vehicle is not in PARK
Vehicle speed is 1.2 mph (1.9 km/h) or
less
Driver's door is ajar
Driver's seat belt is unbuckled or brake
pedal is not depressed
61
Advertisement
Table of Contents
