Table of Contents
Advertisement
HIGH VOLTAGE CHARGING
OPERATION
SAE J1772 Charging Inlet
Your vehicle uses an industry standard SAE
J1772 charge inlet (vehicle charge inlet) for
both AC Level 1 (120V) and AC Level 2 (240V)
charging.
Vehicle Charge Inlet
AC Level 1 Charging (120V, 15 Amp)
Your vehicle is equipped with a 120 Volt AC,
SAE J1772 Level 1 Electric Vehicle Supply
Equipment (EVSE), also referred to as a charging
cordset. AC Level 1 charging requires a conven-
tional NEMA 5-15R 120 Volt AC grounded wall
receptacle along with the portable charging
cordset provided with the vehicle.
6
Portable Charging Cordset (EVSE)
WARNING!
Shock, fire, property damage, or personal
injury may occur if the Portable EVSE
Cordset is not used properly. There are no
serviceable parts contained in the Portable
EVSE Cordset. Any attempt to service it
may result in shock, fire, property damage,
or personal injury.
To access the portable charging cordset,
open the door of the cargo area storage bin,
on the driver's side, and remove the charging
cordset from the storage bag.
NOTE:
After use, the EVSE should be placed in the
storage bag and put back to the cargo area
storage bin. If the charging cordset will be
left outside the vehicle, be sure to protect the
charging cordset's vehicle connection end
from moisture, dirt, debris, etc. accumula-
tion and contamination.
Cargo Area Storage Bin
NOTE:
The portable charging cordset is used for AC
Level 1 charging only.
Advertisement
Table of Contents
