Table of Contents
Advertisement
An indoor/outdoor charge cable, EV- rated
A Status Indicator Display
Charging Cordset
1 — Charge Connector
2 — Status Indicator Display
3 — Charging Cordset Enclosure
4 — Charge Cable
5 — AC Plug
Charging Cordset Operation
1. Plug the AC plug of the charging cordset
into a 15 A, or 20 A, 120 VAC, 60 Hz,
grounded wall receptacle. Do not use an
extension cord, outlet/plug adapter, or a
worn outlet. The charging cordset will not
operate safely unless it is plugged
directly into the wall receptacle.
8
NOTE:
The EVSE should be plugged into a dedicated
circuit, not a circuit shared with other
devices drawing electricity on the circuit.
AC Plug And Wall Receptacle
WARNING!
Improper
connection
equipment-grounding
conductor
result in a risk of electric shock. Check
with a qualified electrician or serviceman if
you are in doubt as to whether the wall
receptacle is properly grounded. Do not
modify the plug provided with the product
– if it does not fit the outlet, you must have
a proper outlet installed by a qualified
electrician.
2. Check to see if the charging cordset is
ready to charge by reviewing the indicator
lights. After a brief self-check, where the
indicator light will flash, a green AC indi-
cator light and two green "charge active"
indicator lights indicate that the cordset
is ready for use.
Cordset Indicator Lights
of
the
could
1 — AC Power Indicator Light
2 — Fault Indicator Light
3 — Charge Active Indicator Lights
Advertisement
Table of Contents
