Vehicle Info
Push and release the up or down arrow button
until Vehicle Info is highlighted in the instru-
ment cluster display. Push the left or right
arrow button to scroll through the following
information submenus:
Tire Pressure
If tire pressure is OK for all tires, a vehicle
ICON is displayed with tire pressure values
in each corner of the ICON.
If one or more tires have low pressure, "In-
flate Tire To XX" is displayed with the ve-
hicle ICON, and the tire pressure values in
each corner of the ICON with the pressure
value of the low tire displayed in a different
color than the other tire pressure value.
If the Tire Pressure system requires ser-
vice, "Service Tire Pressure System" is
displayed.
Tire Pressure is an information only func-
tion and cannot be reset.
Refer to "Tire Pressure Monitoring System
(TPMS)" under "Safety" for further infor-
mation.
Coolant Temperature
Displays the actual coolant temperature.
Oil Temperature
Displays the actual oil temperature.
Oil Pressure
Displays the actual oil pressure.
Battery Voltage
Displays the actual battery voltage.
Engine Hours — If Equipped
Displays the number of hours of engine op-
eration.
Oil Life
Displays the remaining engine oil life as a
percentage.
To reset the Oil Life, you must hold the OK
button. The "Hold OK to Reset" instruc-
tion will be displayed at all times, but the
following conditions will need to be met in
order to reset Oil Life:
The vehicle propulsion system must be
OFF
The ignition must be in the ON/RUN
position
If the conditions are met, holding the OK
button will reset the gauge and the numer-
ic display will return to 100%.
If the conditions are not met, a popup
message will display for five seconds, de-
scribing the required conditions, and then
the Oil Life screen will reappear.
NOTE:
This procedure should only be performed
after scheduled maintenance is completed.
Resetting oil life other than when associated
with a scheduled maintenance may result in
severe engine damage due to not properly
maintaining the engine oil.
Driver Assist — If Equipped
Push and release the up or down arrow button
until Driver Assist is highlighted in the instru-
ment cluster display.
Adaptive Cruise Control and LaneSense:
Driver Assist Screen shows the current
status of both the Adaptive Cruise Control
(ACC) and the LaneSense systems
Popup messages also indicate the status of
the system and/or the conditions that need
to be met
33