Chrysler Pacifica 2021 Owner's Manual
  1. Manuals
  2. Brands
  3. Chrysler Manuals
  4. Automobile
  5. Pacifica 2021
  6. Owner's manual

Chrysler Pacifica 2021 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

2021 Pacifica
O W N E R ' S M A N U A L

Advertisement

Table of Contents
loading

Related Manuals for Chrysler Pacifica 2021

Summary of Contents for Chrysler Pacifica 2021

  • Page 1 2021 Pacifica O W N E R ’ S M A N U A L...
  • Page 2 This Owner’s Manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle. This manual may also include a description of features and equipment that are no longer available or were not ordered on this vehicle. Please disregard any features and equipment described in this manual that are not on this vehicle.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION ..........................8 GETTING TO KNOW YOUR VEHICLE ..................13 GETTING TO KNOW YOUR INSTRUMENT PANEL ............107 STARTING AND OPERATING ....................129 MULTIMEDIA ..........................185 SAFETY ............................227 IN CASE OF EMERGENCY ....................286 SERVICING AND MAINTENANCE ..................312 TECHNICAL SPECIFICATIONS ....................

  • Page 4: Introduction

    INTRODUCTION Heated Seats............50 DOORS..............22 Ventilated Seats — If Equipped .......51 Manual Door Locks — If Equipped ....22 SYMBOLS KEY............10 Adjustable Armrest (Front Seats) — Power Door Locks — If Equipped.....23 VEHICLE MODIFICATIONS/ALTERATIONS..10 If Equipped ............51 Keyless Enter ‘n Go™ — Passive Entry ...24 SYMBOL GLOSSARY..........
  • Page 5 INTERIOR LIGHTS ..........65 WINDOWS .............. 91 UNIVERSAL GARAGE DOOR OPENER (HOMELINK®) ............59 Interior Courtesy Lights ........65 Power Windows ..........91 WINDSHIELD WIPER AND WASHERS ....66 Automatic Window Features ......92 Before You Begin Programming Reset Auto Up...........92 HomeLink®............59 Windshield Wiper Operation......67 Wind Buffeting..........92 Rain Sensing Wipers —...
  • Page 6 GETTING TO KNOW YOUR STARTING AND OPERATING To Manually Turn Off The Stop/Start System ........144 INSTRUMENT PANEL STARTING THE ENGINE ........130 To Manually Turn On The Normal Starting ..........130 INSTRUMENT CLUSTER........108 Stop/Start System ........145 AutoPark ............131 Instrument Cluster Descriptions ....

  • Page 7: Multimedia

    MULTIMEDIA Listening To Audio With The Screen LANESENSE — IF EQUIPPED ......166 Closed ............219 LaneSense Operation ........166 UCONNECT SYSTEMS ........186 Rear Climate Controls........219 Turning LaneSense On Or Off....... 167 CYBERSECURITY ..........186 Accessibility — If Equipped ......221 LaneSense Warning Message......

  • Page 8: In Case Of Emergency

    SAFETY TIPS ............283 JUMP STARTING ..........304 VEHICLE MAINTENANCE ........319 Transporting Passengers ......283 Preparations For Jump Start ......304 Engine Oil ............319 Transporting Pets ........284 Jump Starting Procedure ......305 Engine Oil Filter ..........320 Safety Checks You Should Make REFUELING IN EMERGENCY –...

  • Page 9: Technical Specifications

    CUSTOMER ASSISTANCE DEPARTMENT OF TRANSPORTATION FUEL REQUIREMENTS ........364 UNIFORM TIRE QUALITY GRADES ....358 3.6L Engine ........... 364 SUGGESTIONS FOR OBTAINING SERVICE Reformulated Gasoline......... 364 Treadwear ............358 FOR YOUR VEHICLE ..........369 Gasoline/Oxygenate Blends ......365 Traction Grades ..........359 Prepare For The Appointment ......
  • Page 10 FCA US LLC aims at a constant improvement of the vehicles produced. For this reason, it reserves the right to make changes to the model described for technical and/or commercial reasons. For further information, contact an authorized dealer. When it comes to service, remember that authorized dealers know your Chrysler vehicle best, have factory-trained technicians, genuine Mopar® parts, and care about your satisfaction.

  • Page 11: Symbols Key

    SYMBOLS KEY VEHICLE MODIFICATIONS/ALTERATIONS These statements are against operating WARNING! WARNING! procedures that could result in a collision, bodily Any modifications or alterations to this vehicle could seriously affect its injury and/or death. roadworthiness and safety and may lead to a collision resulting in serious These statements are against procedures that injury or death.
  • Page 12 Red Warning Lights Red Warning Lights Door Open Warning Light Seat Belt Reminder Warning Light page 121 page 122 Ú Ú Electric Power Steering Fault Warning Light Transmission Temperature Warning Light page 121 page 122 Ú Ú Electronic Throttle Control (ETC) Warning Light Vehicle Security Warning Light page 121 page 123...
  • Page 13 Yellow Warning Lights Yellow Warning Lights Electronic Stability Control (ESC) OFF Warning Light Service Stop/Start System Warning Light page 123 page 124 Ú Ú Electronic Stability Control (ESC) Active Warning Light Tire Pressure Monitoring System (TPMS) Warning Light page 123 page 125 Ú...
  • Page 14 Green Indicator Lights White Indicator Lights Front Fog Indicator Light Adaptive Cruise Control (ACC) Ready Light page 126 page 127 Ú Ú KeySense Indicator Light Cruise Control Ready Indicator Light page 126 page 127 Ú Ú LaneSense Indicator Light LaneSense Indicator Light page 126 page 127 Ú...

  • Page 15: Keys

    GETTING TO KNOW YOUR VEHICLE KEYS The emergency key allows for entry into the vehicle should the battery in the vehicle or the key fob become depleted. The emergency key is also for locking/unlocking the glove compartment. You can Your vehicle is equipped with a key fob which keep the emergency key with you when valet supports Passive Entry, Remote Keyless Entry parking.
  • Page 16 GETTING TO KNOW YOUR VEHICLE In case the ignition switch does not change with Vehicles Equipped With Keyless Enter ‘n Go™ — 1. Remove the emergency key by pushing the the push of a button, the key fob may have a low or Passive Entry mechanical release button on the side of the fully depleted battery.
  • Page 17 GETTING TO KNOW YOUR VEHICLE 5. Align the back cover into its original position Only key fobs that are programmed to the KeySense also has additional features that are  and snap it back in place by pushing it against vehicle electronics can be used to start and always enabled when the specific key is in use that the fob until it is seated all around.

  • Page 18: Sentry Key

    GETTING TO KNOW YOUR VEHICLE Start Up Display Features The system uses a key fob, keyless push button CAUTION! ignition and a Radio Frequency (RF) receiver to Unique splash screen graphic  prevent unauthorized vehicle operation. Therefore, The Sentry Key Immobilizer system is not Telltale illuminated ...
  • Page 19 GETTING TO KNOW YOUR VEHICLE ON/RUN WARNING! Driving position  When leaving the vehicle, always remove the  All electrical devices are available  key fob from the vehicle and lock your vehicle. (e.g. climate controls, etc.) Never leave children alone in a vehicle, or with ...

  • Page 20: Remote Start - If Equipped

    GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: WARNING! The key fob may not be detected by the vehicle With Remote Start, the engine will only run for   Do not start or run an engine in a closed Keyless Enter ‘n Go™ system if it is located next ...

  • Page 21: To Exit Remote Start Mode

    GETTING TO KNOW YOUR VEHICLE Battery at an acceptable charge level EMOTE TART EMOTE TART RONT EFROST  PANIC button not pushed — I  CTIVATION QUIPPED If applicable, refer to the “Hybrid Supplement” for System not disabled from previous Remote ...

  • Page 22: Remote Start Windshield Wiper De-Icer Activation - If Equipped

    GETTING TO KNOW YOUR VEHICLE VEHICLE SECURITY SYSTEM — IF EQUIPPED Automatic Temperature Control (ATC) — Remote Start mode. This includes the OFF button If Equipped on the climate controls, which will turn the system The Vehicle Security system monitors the vehicle off.

  • Page 23: To Disarm The System

    GETTING TO KNOW YOUR VEHICLE DOORS Push the lock button on the exterior Passive system. If someone enters the vehicle through  Entry door handle with a valid key fob avail- the liftgate and opens any door, the alarm will able in the same exterior zone page 23.

  • Page 24: Power Door Locks - If Equipped

    GETTING TO KNOW YOUR VEHICLE Therefore, make sure the key fob is not inside the WARNING! vehicle before closing the door. Do not leave the key fob in or near the vehicle, NOTE:  or in a location accessible to children, and do The manual door locks will not lock or unlock the not leave Keyless Enter ‘n Go™...

  • Page 25: Keyless Enter 'N Go™ - Passive Entry

    GETTING TO KNOW YOUR VEHICLE If you push the power door lock switch while the If set by the customer in the Uconnect Settings,  ignition is in the ACC or ON/RUN position, and any unlocking with Passive Entry will initiate illumi- front door is open, the power locks will not operate.
  • Page 26 GETTING TO KNOW YOUR VEHICLE NOTE: There are three situations that trigger a FOBIK-Safe search in any Passive Entry vehicle: On the third attempt ALL doors will lock and the key fob can be locked in the vehicle. A lock request is made by a valid key fob while a ...

  • Page 27: Automatic Unlock Doors On Exit - If Equipped

    GETTING TO KNOW YOUR VEHICLE — Always make sure that the sliding door is fully UTOMATIC NLOCK OORS latched anytime the vehicle is in motion. QUIPPED NOTE: The Unlock Doors Automatically On Exit feature The left side sliding door cannot be opened while unlocks all of the vehicle doors when any door is the fuel door is open.
  • Page 28 GETTING TO KNOW YOUR VEHICLE The key fob and the overhead console button will There are power sliding side door switches located operate the door when the door is locked. All other on the B-pillar trim panel, just in front of the power ways require the sliding door to be unlocked.

  • Page 29: Hands-Free Sliding Doors

    GETTING TO KNOW YOUR VEHICLE With every movement of the Hands-Free Sliding  WARNING! Doors, an audible tone will sound and the turn signals will flash. You can turn these alerts on or Personal injury or cargo damage may occur if ...
  • Page 30 GETTING TO KNOW YOUR VEHICLE NOTE: To Engage The Child Protection Door Lock WARNING! 1. Open the sliding side door. After engaging the Child Protection Door Lock,  Avoid trapping anyone in the vehicle in a always test the inside door handle with the 2.

  • Page 31: Steering Wheel

    GETTING TO KNOW YOUR VEHICLE STEERING WHEEL Press the heated steering wheel button once  WARNING! to turn the heating element on. Do not adjust the steering column while driving. ELESCOPING TEERING OLUMN Press the heated steering wheel button  Adjusting the steering column while driving or second time to turn the heating element off.

  • Page 32: Driver Memory Settings - If Equipped

    GETTING TO KNOW YOUR VEHICLE DRIVER MEMORY SETTINGS — IF EQUIPPED 3. Push the set (S) button on the memory switch, and then push the desired memory button This feature allows the driver to save up to two (1 or 2) within five seconds. The instrument different memory profiles for easy recall through a cluster display will show which memory memory switch.

  • Page 33: Memory Position Recall

    GETTING TO KNOW YOUR VEHICLE 4. Push and release button (1) or (2) accordingly. To recall the memory settings for driver one or two, WARNING! “Memory Profile Set” (1 or 2) will display in the push the desired memory button (1 or 2) on the instrument cluster.
  • Page 34 GETTING TO KNOW YOUR VEHICLE Manual Front Adjuster WARNING! Both front seats are adjustable forward or Adjusting a seat while driving may be  rearward. The manual seat adjustment handle is dangerous. Moving a seat while driving could located under the seat cushion at the front edge of result in loss of control which could cause a each seat.

  • Page 35: Manual Adjustment (Rear Seats)

    GETTING TO KNOW YOUR VEHICLE Manual Recline — Quad Seats ANUAL DJUSTMENT EATS WARNING! Adjusting a seat while the vehicle is moving is  dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured.
  • Page 36 GETTING TO KNOW YOUR VEHICLE Second Row Bench Seat — If Equipped Removing The Bench Seat 1. Adjust the driver and passenger seats The second row bench seat can accommodate two forward to allow room for the bench seat passengers, while providing easy access to the removal.
  • Page 37 GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: Seat can be removed easier with one outboard Due to the weight of the bench seat, it is recom-  seat stowed in the load floor. mended that two people are utilized for its removal.
  • Page 38 GETTING TO KNOW YOUR VEHICLE Fold-Flat — Quad Seats If applicable, refer to the “Hybrid Supplement” for additional information. To fold the seat, lift the recliner lever to the full upward position and push the seatback forward until it rests on the seat cushion. Stow ‘n Go Seating Head Restraint Lift Easy Tilt Seat Lever (If Equipped) Easy Entry...
  • Page 39 GETTING TO KNOW YOUR VEHICLE 2. To put it back into position, pull back on the WARNING! folded seat and make sure that it locks into position. Then, pull the seatback toward the Do not use this feature with a child in seat. back and fold down the arm rests.
  • Page 40 GETTING TO KNOW YOUR VEHICLE Second Row Removable Quad Seat 6. The seat assembly can now be removed from the vehicle. Grab the front seatback edge The second row quad seats, not equipped with the located near the head restraint and the grab Stow ‘n Go feature, are removable for added cargo the bar on the rear side of the seat cushion for space.
  • Page 41 GETTING TO KNOW YOUR VEHICLE 3. Lift the recline handle and return the seatback 3. Pull release strap marked “2” and tumble the to the seating position. seat rearward into the storage bin. WARNING! If not properly latched, the seat could become loose.
  • Page 42 GETTING TO KNOW YOUR VEHICLE To Unfold Third Row Seats 3. Raise the head restraint to its upright position. The Auto Advance ‘n Return feature is available to both the front driver and passenger power seats 1. Pull up on the assist strap to lift the seat out (if equipped).
  • Page 43 GETTING TO KNOW YOUR VEHICLE Using the Auto Advance ‘n Return Feature NOTE: SECOND ROW STOW 'N GO NOTE: To abort seat operation while seat is in motion,  For Manual Seats: To stow the seat in the floor, push the Auto Advance ‘n Return button, or move the front seat all the way forward using the The button is only functional when the power ...
  • Page 44 GETTING TO KNOW YOUR VEHICLE NOTE: 3. Pull the floor panel and position it toward the front seats while folding the top half down and Push the lock rod inward for the locked posi-  rest it against the front seats. tion.
  • Page 45 GETTING TO KNOW YOUR VEHICLE 7. Close the floor by pulling the floor panel 9. Readjust the front seat as needed, and TO UNSTOW SECOND ROW SEATS backwards by the bottom corner edge of the replace the floor mat (if equipped). For Manual Seats: To unstow the seat from the panel.
  • Page 46 GETTING TO KNOW YOUR VEHICLE 2. Pull the latch located near the second row seat 4. Pull the strap located on the seat and pull the to open the floor panel. seat out of the storage area. Push the seat rearward making sure that it locks into the floor.

  • Page 47: Power Adjustment (Front Seats)

    GETTING TO KNOW YOUR VEHICLE WARNING! WARNING! In a collision, you or others in your vehicle Do not ride with the seatback reclined so that   could be injured if seats are not properly the shoulder belt is no longer resting against latched to their floor attachments.
  • Page 48 GETTING TO KNOW YOUR VEHICLE Adjusting The Seat Up Or Down The front passenger’s seat may be equipped with WARNING! a two way lumbar adjustment. The power lumbar The height of the seats can be adjusted up or switch is located on the outboard side of the Seats should be adjusted before fastening the ...

  • Page 49: Power Adjustment (Rear Seats)

    GETTING TO KNOW YOUR VEHICLE The Easy Entry/Easy Exit feature is disabled Third Row Power Recline — If Equipped  WARNING! when the driver seat position is less than The power recline feature, located on the trim 0.9 inches (2.3 cm) forward of the rear stop. At Do not ride with the seatback reclined so that ...
  • Page 50 GETTING TO KNOW YOUR VEHICLE Third Row Power Stow ‘n Go Seat — Left and right third row seats can be folded To move the selected seat(s) back in the forward or individually or together. The third row power folding reverse direction, push and hold the “Fold If Equipped seat adjusts to the following positions using the...

  • Page 51: Heated Seats

    GETTING TO KNOW YOUR VEHICLE 3. To abort seat operation while seat is in motion, NOTE: Rear Heated Seats — If Equipped push a different seat position selector switch Once a heat setting is selected, heat will be felt  On some models, the second row seats are to stop the seat.

  • Page 52: Ventilated Seats - If Equipped

    GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: LASTIC ROCERY ETAINER Once a heat setting is selected, heat will be felt The engine must be running for the ventilated OOKS within two to five minutes. seats to operate. Retainer hooks which will hold plastic grocery bag When the HI-level setting is selected, the heater For information on use with the Remote Start handles are built into the seatbacks of the second...
  • Page 53 GETTING TO KNOW YOUR VEHICLE Head Restraints — Front Seats The front driver and passenger seats are equipped with four-way head restraints. To raise the head restraint, pull upward on the head restraint. To lower the head restraint, push the adjustment button, located at the base of the head restraint, and push downward.
  • Page 54 GETTING TO KNOW YOUR VEHICLE Head Restraints — Second Row Quad To raise the head restraint, pull upward on the WARNING! head restraint. To lower the head restraint, push Seats the adjustment button, located at the base of the A loose head restraint thrown forward in a ...

  • Page 55: Uconnect Voice Recognition

    GETTING TO KNOW YOUR VEHICLE Press the Head Restraint Fold button to power fold the third row head restraints. NOTE: The head restraints can be folded downward  using the Head Restraint button or using the manual release strap. The head restraints must be raised manually when occupying the third row.

  • Page 56: Basic Voice Commands

    GETTING TO KNOW YOUR VEHICLE A passenger can press the VR button shortcut ASIC OICE OMMANDS  DDITIONAL NFORMATION on the radio status bar to also issue a The basic Voice Commands below can be given at © 2021 FCA US LLC. All rights reserved. Mopar and command.

  • Page 57: Illuminated Vanity Mirrors

    GETTING TO KNOW YOUR VEHICLE Manual Rearview Mirror Automatic Dimming Mirror Illuminated Mirror Automatic Dimming Mirror — If Equipped UTSIDE IRRORS CAUTION! This mirror automatically adjusts for headlight The outside mirror(s) can be adjusted to the center To avoid damage to the mirror during cleaning, glare from vehicles behind you.

  • Page 58: Driver's Outside Automatic Dimming Mirror - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I NOTE: RIVER UTSIDE UTOMATIC OWER IRRORS QUIPPED A light in the selected button will illuminate indi- — I IMMING IRROR QUIPPED The power mirror controls are located on the cating the mirror is activated and can be adjusted. driver-side door trim panel.

  • Page 59: Heated Mirrors - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I — Automatic Power Folding Mirrors - If Equipped EATED IRRORS QUIPPED OWER OLDING UTSIDE IRRORS When enabled within Uconnect Settings, the power QUIPPED These mirrors are heated to melt frost or mirrors will automatically fold when the ignition is ice.

  • Page 60: Universal Garage Door Opener

    GETTING TO KNOW YOUR VEHICLE UNIVERSAL GARAGE DOOR OPENER NOTE: The HomeLink® indicator light is located above  the center button page 371. Erasing all channels should only be performed Ú (HOMELINK®) when programming HomeLink® for the first time. EFORE EGIN ROGRAMMING Do not erase channels when programming addi-...

  • Page 61: Programming Homelink® To A Garage Door Opener

    GETTING TO KNOW YOUR VEHICLE Non-rolling Code Devices NOTE: Non-Rolling Code Garage Door Opener Final Steps Make sure the garage door opener motor is Most devices manufactured before 1995 will not 1. Push and hold the programmed HomeLink® plugged in before moving on to the rolling code/ button and observe the HomeLink®...

  • Page 62: Miscellaneous Device

    GETTING TO KNOW YOUR VEHICLE ® T 1. Place the ignition in the ON/RUN position, It may be helpful to unplug the device during the ROGRAMMING without starting the engine. cycling process to prevent possible overheating of ISCELLANEOUS EVICE the garage door or gate motor. 2.

  • Page 63: Exterior Lights

    GETTING TO KNOW YOUR VEHICLE EXTERIOR LIGHTS NOTE: If the indicator light stays on constantly,  ULTIFUNCTION EVER programming is complete and the garage door/device should activate when the The multifunction lever is located on the left side of HomeLink® button is pressed. the steering column.

  • Page 64: Daytime Running Lights (Drls)

    GETTING TO KNOW YOUR VEHICLE (DRL ) — — I NOTE: AYTIME UNNING IGHTS UTOMATIC QUIPPED This system will not activate until the vehicle is at, QUIPPED The Automatic High Beam system provides or above 16 mph (25 km/h). increased forward lighting at night by automatically The headlights or LED light bars on your vehicle will To Deactivate controlling the high beams through the use of a...

  • Page 65: Automatic Headlights - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I — I UTOMATIC EADLIGHTS QUIPPED EADLIGHT ELAY QUIPPED IGHTS EMINDER This system automatically turns your headlights on This feature provides the safety of headlight If the headlights or the parking lights are left on or off based on ambient light levels.

  • Page 66: Turn Signals

    GETTING TO KNOW YOUR VEHICLE position and the headlight switch in any position To operate the courtesy lights, push either the IGNALS other than OFF or AUTO, the lights will turn off driver or passenger light switch. Move the multifunction lever up or down to automatically until the next cycle of the ignition or NOTE: activate the turn signals.

  • Page 67: Windshield Wiper And Washers

    GETTING TO KNOW YOUR VEHICLE Ambient Light Control — If Equipped Instrument Panel Dimmer Control Parade Mode (Daytime Brightness Feature) Rotate the ambient dimmer control upward or The instrument panel dimmer control is part of the downward to increase or decrease the brightness headlight switch, and is located on the driver’s side Rotate the instrument panel dimmer control of the ambient light located in the door handle...

  • Page 68: Windshield Wiper Operation

    GETTING TO KNOW YOUR VEHICLE while the wipers are in the off position, the wipers INDSHIELD IPER PERATION WARNING! will operate several cycles, then turn off. The wipers and washers are operated by a switch Sudden loss of visibility through the windshield Mist within the wiper lever.

  • Page 69: Rear Wiper And Washer

    GETTING TO KNOW YOUR VEHICLE CLIMATE CONTROLS Use of Rain-X or products containing wax or sili- Remote Start Mode Inhibit — On vehicles   cone may reduce rain sensor performance. equipped with the Remote Start system, Rain Sensing wipers are not operational when the UTOMATIC LIMATE ONTROL...
  • Page 70 GETTING TO KNOW YOUR VEHICLE Max A/C Button Recirculation Button Press and release this button on the touch-  screen Press and release the MAX A/C button on Press and release the Recirculation Push the button on the faceplate the touchscreen to change the current button on the touchscreen, or press the ...
  • Page 71 GETTING TO KNOW YOUR VEHICLE Rear Defrost Button Front Temperature Control NOTE: The SYNC setting is only available on the touch- Press and release the Rear Defrost These buttons provide the driver and passenger screen. Control button to turn on the rear window with independent temperature control.
  • Page 72 GETTING TO KNOW YOUR VEHICLE Mode Control Floor Mode To return to the Front screen on the Uconnect  system, press the "Front Climate" or “Done” The airflow distribution mode can be Air comes from the floor outlets. A slight button on the touchscreen.
  • Page 73 GETTING TO KNOW YOUR VEHICLE REAR CLIMATE CONTROL BUTTON REAR TEMPERATURE CONTROL BLOWER CONTROL Press and release the Rear Climate These buttons provide the front occupants with the Blower Control is used to regulate the button to access the rear climate ability to control the rear temperature.
  • Page 74 GETTING TO KNOW YOUR VEHICLE FLOOR MODE AUTO BUTTON Press this button on the touchscreen to The AUTO button automatically controls change the air distribution mode to Floor the interior cabin temperature by Mode. In Floor Mode, air comes from the adjusting distribution and amount of floor outlets.

  • Page 75: Manual Climate Control Descriptions

    GETTING TO KNOW YOUR VEHICLE REAR MODE CONTROL REAR CLIMATE CONTROL/BLOWER OFF Push this button on the Rear Climate To manually set the rear blower controls Controls to change the air distribution to off, press the Rear Climate Control/ mode for the rear passengers. Blower Off button.
  • Page 76 GETTING TO KNOW YOUR VEHICLE A/C Button Rear Defrost Button unavailable (button on the touchscreen greyed out) if conditions exist that could create fogging on Press and release the A/C button to Push and release the Rear Defrost the inside of the windshield. The A/C (Air change the current setting.
  • Page 77 GETTING TO KNOW YOUR VEHICLE Front Temperature Control NOTE: Mode Control The SYNC setting is only available on the touch- These buttons provide the driver and passenger The airflow distribution mode can be screen. with independent temperature control. adjusted so air comes from the Blower Control instrument panel outlets, floor outlets, Push the red button on the faceplate or...
  • Page 78 GETTING TO KNOW YOUR VEHICLE Bi-Level Mode Controlling The Rear Climate Controls To change the rear system settings: From The Front MTC Display/Touchscreen Press the "Rear Climate" button on the touch- Air comes from the instrument panel  screen to display the rear climate controls. The outlets and floor outlets.
  • Page 79 GETTING TO KNOW YOUR VEHICLE REAR TEMPERATURE CONTROL NOTE: NOTE: The SYNC setting is only available on the touch- Bi-Level Mode is designed under comfort condi- These buttons provide the rear passengers with screen. tions to provide cooler air out of the panel outlets independent temperature control.
  • Page 80 GETTING TO KNOW YOUR VEHICLE REAR TEMPERATURE CONTROL PANEL MODE The rear system temperature control buttons are located on the headliner on the passenger side of To change the temperature in the rear of Air comes from the outlets in the the vehicle.

  • Page 81: Automatic Temperature Control (Atc)

    GETTING TO KNOW YOUR VEHICLE To provide you with maximum comfort in the UTOMATIC EMPERATURE ONTROL PERATING Automatic mode during cold start-ups, the blower (ATC) — I QUIPPED NOTE: fan will remain on low until the engine warms up. Refer to the chart at the end of this section for The blower will increase in speed and transition Automatic Operation suggested control settings for various weather...

  • Page 82: Interior Storage And Equipment

    GETTING TO KNOW YOUR VEHICLE INTERIOR STORAGE AND EQUIPMENT Window Fogging Operating Tips Chart Vehicle windows tend to fog on the inside in mild, WEATHER CONTROL SETTINGS TORAGE rainy, and/or humid weather. To clear the Set the mode control to windows, select Defrost or Mix mode and increase Glove Compartment the front blower speed.
  • Page 83 GETTING TO KNOW YOUR VEHICLE WARNING! CAUTION! If containers of hot liquid are placed in the bottle The storage drawer must be closed while driving. holder, they can spill when the door is closed, If left open during a collision, additional damage burning the occupants.
  • Page 84 GETTING TO KNOW YOUR VEHICLE Umbrella Holder NOTE: Push the lock rod inward for the locked posi- An umbrella holder has been conveniently molded  tion. into the front door entry scuff moldings. Pull outward on the lock rod for the ...
  • Page 85 GETTING TO KNOW YOUR VEHICLE Seat Storage Bin Cover Emergency WARNING! WARNING! Release Lever Always close the storage bin covers when your In a collision, serious injury could result if the  As a security measure, the Seat Storage Bin Cover seat storage bin covers are not properly latched.

  • Page 86: Sun Screens - If Equipped

    GETTING TO KNOW YOUR VEHICLE Coat Hooks — If Equipped To lower the sun screen, gently lift the tab upward to disengage the hooks, and feed the screen back Coat hooks are located along the headliner for the into the base sill. second and third row seating positions.
  • Page 87 GETTING TO KNOW YOUR VEHICLE NOTE: The USB outlet in the bottom of the instrument panel can be switched from ignition only to constant battery powered all the time. See an authorized dealer for details. Front Center Stack AUX Jack And USB Ports Charge Only USB In Floor Tray 1 —...

  • Page 88: Power Outlets

    GETTING TO KNOW YOUR VEHICLE NOTE: the outlet is powered. Power outlets labeled with a “key” are powered when the ignition is in the ON or The USB “Charge Only” ports will recharge battery ACC position, while the outlets labeled with a operated USB devices when connected.
  • Page 89 GETTING TO KNOW YOUR VEHICLE In addition to the front power outlet, there is also a power outlet located in the rear cargo area. The rear power outlet is located in the right rear cargo area. 12 Volt Front Power Outlet (On Center Stack) Power Outlet Fuse Locations 1 —...

  • Page 90: Power Inverter - If Equipped

    GETTING TO KNOW YOUR VEHICLE phones, electronics and other low power devices CAUTION! WARNING! requiring up to 150 Watts. Certain video game consoles will exceed this power limit, as will most Many accessories that can be plugged in draw To avoid serious injury or death: ...

  • Page 91: Cigar Lighter - If Equipped

    GETTING TO KNOW YOUR VEHICLE Your vehicle may be equipped with a 15W 3A Qi CAUTION! CAUTION! wireless charging pad located inside of the storage area below the climate controls. This charging pad The key fob should not be placed on the Do not connect devices with power higher than is designed to wirelessly charge your Qi enabled charging pad or within 6 in (15 cm) of it.

  • Page 92: Windows

    GETTING TO KNOW YOUR VEHICLE WINDOWS Sliding Side Door Power Window Control — If Equipped OWER INDOWS Second row passengers may open and close the sliding door window by a single control on the door The window switches on the driver’s door trim handle assembly.

  • Page 93: Automatic Window Features

    GETTING TO KNOW YOUR VEHICLE buffeting occurs, open the front and rear windows UTOMATIC INDOW EATURES WARNING! together to minimize the buffeting. If the buffeting Auto-Down Feature occurs with the sunroof open, adjust the sunroof There is no anti-pinch protection when the opening to minimize the buffeting.

  • Page 94: Opening And Closing The Sunroof

    GETTING TO KNOW YOUR VEHICLE Any release of the switch during open or close PENING LOSING UNROOF WARNING! operation will stop the movement and the sunroof Express Open/Close will remain in a partially open condition until the Never leave children unattended in a vehicle, ...

  • Page 95: Pinch Protect Feature

    GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: UNROOF AINTENANCE If three consecutive sunroof close attempts result During Express Open or Express Close opera-  Use only a non-abrasive cleaner and a soft cloth to in Pinch Protect reversals, Pinch Protect will tion, any movement of the sunshade switch will clean the glass panel.

  • Page 96: Closing

    GETTING TO KNOW YOUR VEHICLE LIFTGATE 2. Move to the outside of the front of the vehicle. LOSING 3. Push the safety latch release lever toward the If applicable, refer to the “Hybrid Supplement” for NLOCK IFTGATE passenger side of the vehicle. The safety latch additional information.

  • Page 97: To Lock/Close The Liftgate

    GETTING TO KNOW YOUR VEHICLE — I NOTE: OWER IFTGATE QUIPPED When you push the Passive Entry button, either The power liftgate may be opened or closed in only the liftgate will unlock, or all the doors and the several ways: liftgate will unlock, depending on the selected setting in the Uconnect system page 186.

  • Page 98: Hands-Free Liftgate - If Equipped

    GETTING TO KNOW YOUR VEHICLE NOTE: To Lock The Vehicle Vehicles Equipped With A Trailer Tow Package To open the liftgate, the Hands-Free Liftgate With a valid Passive Entry key fob within 5 ft NOTE:  foot activation (if equipped) requires a valid (1.5 m) of the liftgate, pushing the Passive Entry If your vehicle is equipped with the Trailer Tow Passive Entry key fob within 5 ft (1.5 m) of the...

  • Page 99: Cargo Area Features

    GETTING TO KNOW YOUR VEHICLE NOTE: The power liftgate will release, but not power  WARNING! Opening the Hands-Free Liftgate requires a valid open, in temperatures below −12°F (−24°C). Be sure to remove any buildup of snow or ice Passive Entry key fob within 5 ft (1.5 m) of the door During power operation, personal injury or cargo from the liftgate before opening the liftgate.
  • Page 100 GETTING TO KNOW YOUR VEHICLE Stow ‘n Vac Integrated Vacuum — WARNING! WARNING! If Equipped Do not leave the key fob in or near the vehicle, Do not vacuum any flammable   Your vehicle may be equipped with an integrated or in a location accessible to children, and do liquids, such as gasoline, or use vacuum system.
  • Page 101 GETTING TO KNOW YOUR VEHICLE The vacuum will operate in two modes: NOTE: WARNING! The vacuum system will run for 10 minutes off Ignition in the ACC position: Engine remains off,  battery power and then the vacuum will shut down. Do not vacuum toxic material such as chlorine ...
  • Page 102 GETTING TO KNOW YOUR VEHICLE NOTE: WARNING! To access crevice or upholstery attachments, open the front Attachment Compartment. Guard against carbon monoxide with proper  maintenance. Have the exhaust system Crevice Tool — Able to reach into tight  inspected every time the vehicle is raised. spaces including the seat latches located in Have any abnormal conditions repaired the floor.
  • Page 103 GETTING TO KNOW YOUR VEHICLE 6. Before exiting the vehicle: WARNING! WARNING! If the ignition is in the ACC position, push  Do not vacuum any flammable Do not vacuum hard or sharp objects such as   the START/STOP ignition button to place liquids, such as gasoline, or use glass, nails, screws, coins, etc.
  • Page 104 GETTING TO KNOW YOUR VEHICLE If there are any other issues with your vacuum, To Remove Vacuum Hose For Cleaning  contact an authorized dealer. Your vacuum has 1. Open the access panel. no user serviceable parts. Debris Bin The debris bin is located behind the access panel behind the third row seat on the driver’s side.

  • Page 105: Stow 'N Place Roof Rack - If Equipped

    GETTING TO KNOW YOUR VEHICLE STOW ‘N PLACE ROOF RACK — IF EQUIPPED The Stow ‘N Place roof rack does not increase the total load carrying capacity of the vehicle. Be sure The crossbars and side rails are designed to carry the total load of cargo inside the vehicle plus that weight on vehicles equipped with a luggage rack.
  • Page 106 GETTING TO KNOW YOUR VEHICLE 4. Once the crossbar is in place, tighten both thumb screws completely. Removing Crossbars Bending Pivot 3. Position the crossbars across the roof making CAUTION! sure the letters on the crossbars align with the Installing Crossbars matching letters on the side rail.

  • Page 107: Stowing The Crossbars

    GETTING TO KNOW YOUR VEHICLE 3. Then, position the crossbar along the correct 4. The crossbar will nest fully within the side rail. TOWING ROSSBARS side rail. Make sure the letters on the crossbar 1. Starting with one crossbar, completely loosen align with the matching letters on the side rail.

  • Page 108: Getting To Know Your Instrument Panel

    GETTING TO KNOW YOUR VEHICLE 6. Repeat the procedure to stow the second WARNING! CAUTION! crossbar on the opposite side. Cargo must be securely tied down before driving Load should always be secured to cross bars  your vehicle. Improperly secured loads can fly off first, with tie down loops used as additional the vehicle, particularly at high speeds, resulting securing points if needed.

  • Page 109: Instrument Cluster

    GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER Base Instrument Cluster...
  • Page 110 GETTING TO KNOW YOUR INSTRUMENT PANEL Premium Instrument Cluster...

  • Page 111: Instrument Cluster Descriptions

    GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: NSTRUMENT LUSTER ESCRIPTIONS WARNING! The hard telltales will illuminate for a bulb check 1. Tachometer Driving with a hot engine cooling system could when the ignition is first cycled. Indicates the engine speed in revolutions damage your vehicle.

  • Page 112: Instrument Cluster Display Location And Controls

    GETTING TO KNOW YOUR INSTRUMENT PANEL Right Arrow Button NSTRUMENT LUSTER ISPLAY  OCATION ONTROLS Push and release the right arrow button to access the information screens or submenu The vehicle’s instrument cluster is equipped with screens of a main menu item. an instrument cluster display (base or premium Down Arrow Button ...

  • Page 113: Oil Life Reset

    GETTING TO KNOW YOUR INSTRUMENT PANEL Oil Life Reset Secondary Method For Oil Life Reset Procedure ESET 1. Without pressing the brake pedal, push the 1. Without pushing the brake pedal, place the Your vehicle is equipped with an engine oil ...

  • Page 114: Instrument Cluster Display Menu Items

    GETTING TO KNOW YOUR INSTRUMENT PANEL With KeySense in use there will be multiple associated messages shown in the following table: Setting Instrument Cluster Display Message None – With vehicle ignition ON “KeySense in use. Max vehicle speed set to xx MPH/or km/h” “Max speed reached.
  • Page 115 GETTING TO KNOW YOUR INSTRUMENT PANEL Coolant Temp Battery Voltage Trip Info Displays the actual coolant temperature. Displays the actual battery voltage. Push and release the up or down arrow Transmission Temp Engine Hours — If Equipped button until the Trip Menu item is highlighted in the instrument cluster display.
  • Page 116 GETTING TO KNOW YOUR INSTRUMENT PANEL Messages Push and release the up or down arrow button until Messages is highlighted in the instrument cluster display. This feature shows the number of stored warning messages. Pushing the right arrow button will allow you to see what the stored messages are. NOTE: The pop-up messages indicate the status of the system and/or the conditions that need to be met.
  • Page 117 GETTING TO KNOW YOUR INSTRUMENT PANEL Premium Instrument Cluster Display Screen Setup Options: None  Compass  Outside Temp  Time  Range  Average (MPG, L/100km, or km/L)  2 —Upper Center Current (MPG, L/100km, or km/L)  Trip A Distance ...
  • Page 118 GETTING TO KNOW YOUR INSTRUMENT PANEL Premium Instrument Cluster Display Screen Setup Options: Show  4 — Odometer (Premium Instrument Cluster) Hide (Odometer will still appear when door is open)  Restore  5 — Defaults Cancel  Base Instrument Cluster Display Screen Setup Options: None ...
  • Page 119 GETTING TO KNOW YOUR INSTRUMENT PANEL Base Instrument Cluster Display Screen Setup Options: None  Compass  Outside Temp  Time  Range  Average (MPG, L/100km, or km/L)  3 — Center Current (MPG, L/100km, or km/L)  Trip A Distance ...

  • Page 120: Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped

    GETTING TO KNOW YOUR INSTRUMENT PANEL Speed Warning — If Equipped These messages indicate the vehicle battery has a ATTERY AVER ATTERY AVER low state of charge and continues to lose electrical — E ESSAGE LECTRICAL Push and release the up or down arrow charge at a rate that the charging system cannot...

  • Page 121: Trip Computer

    GETTING TO KNOW YOUR INSTRUMENT PANEL TRIP COMPUTER Loss of the battery charge may indicate one or What to do when an electrical load reduction more of the following conditions: action message is present (“Battery Saver On” or The Trip Computer is located in the instrument “Battery Saver Mode”) The charging system cannot deliver enough ...

  • Page 122: Warning Lights And Messages

    GETTING TO KNOW YOUR INSTRUMENT PANEL Trip B is low, or that there is a problem with the Anti-Lock ARNING IGHTS Brake System reservoir. Shows the total distance traveled for Trip B  Air Bag Warning Light since the last reset. If the light remains on when the parking brake has This warning light will illuminate to been disengaged, and the fluid level is at the full...
  • Page 123 GETTING TO KNOW YOUR INSTRUMENT PANEL Door Open Warning Light — If Equipped completely stopped and the transmission is placed WARNING! in the PARK (P) position. The light should turn off. This warning light will illuminate when a If the light remains on with the vehicle running, Driving a vehicle with the red brake light on is door is ajar/open and not fully closed.
  • Page 124 GETTING TO KNOW YOUR INSTRUMENT PANEL Oil Pressure Warning Light Transmission Temperature Warning Light If the light turns on while driving, safely pull over and stop the vehicle. If the Air Conditioning (A/C) — If Equipped This warning light will illuminate to system is on, turn it off.

  • Page 125: Yellow Warning Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Vehicle Security Warning Light — If the ABS light remains on or turns on while The ESC OFF Indicator Light and the ESC Indi-  driving, then the Anti-Lock portion of the brake cator Light come on momentarily each time the If Equipped system is not functioning and service is required as ignition is placed in the ON/RUN or ACC/ON/...
  • Page 126 GETTING TO KNOW YOUR INSTRUMENT PANEL Low Washer Fluid Warning Light — If the bulb does not come on when turning the CAUTION! ignition switch from OFF to ON/RUN, have the If Equipped condition checked promptly. Prolonged driving with the Malfunction Indicator This warning light will illuminate when the Light (MIL) on could cause damage to the Certain conditions, such as a loose or missing gas...
  • Page 127 GETTING TO KNOW YOUR INSTRUMENT PANEL Tire Pressure Monitoring System (TPMS) vehicle placard or tire inflation pressure label, you When the malfunction indicator is illuminated, the should determine the proper tire inflation pressure system may not be able to detect or signal low tire Warning Light pressure as intended.

  • Page 128: Yellow Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Cruise Control Set Indicator Light — Parking/Headlights On Indicator Light ELLOW NDICATOR IGHTS If Equipped This indicator light will illuminate when Automatic Emergency Braking (AEB) OFF the parking lights or headlights are This indicator light will illuminate when Indicator Light —...

  • Page 129: White Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Set Speed Display If any of these systems require service, the OBD II HITE NDICATOR IGHTS system will turn on the Malfunction Indicator Light The Set Speed Display indicator light Adaptive Cruise Control (ACC) Ready Light (MIL).

  • Page 130: Emissions Inspection And Maintenance Programs

    GETTING TO KNOW YOUR INSTRUMENT PANEL For states that require an Inspection and 3. Approximately 15 seconds later, one of two WARNING! Maintenance (I/M), this check verifies things will happen: the Malfunction Indicator Light (MIL) is ONLY an authorized service technician should ...

  • Page 131: Starting And Operating

    STARTING AND OPERATING STARTING THE ENGINE ENGINE START/STOP Button Functions — With WARNING! Driver’s Foot OFF The Brake Pedal (In PARK Or Before starting your vehicle, adjust your seat, NEUTRAL Position) Do not leave children or animals inside parked  adjust both inside and outside mirrors, and fasten vehicles in hot weather.

  • Page 132: Autopark

    STARTING AND OPERATING ALWAYS DO A VISUAL CHECK that your vehicle is in CAUTION! PARK by looking for the “P” in the instrument AutoPark is a supplemental feature to assist in cluster display and on the gear selector. As an Engine will remain running.
  • Page 133 STARTING AND OPERATING WARNING! WARNING! WARNING! Never use the PARK position as a substitute It is dangerous to shift out of PARK or Never leave children alone in a vehicle, or with    for the parking brake. Always apply the NEUTRAL if the engine speed is higher than access to an unlocked vehicle.

  • Page 134: Cold Weather Operation (Below -22°F Or −30°C)

    STARTING AND OPERATING To Turn On The Engine Using ENGINE START/STOP NGINE AILS TART WARNING! Button If vehicle speed is not below 1.2 mph (1.9 km/h) 1. The transmission must be in PARK or WARNING! when the driver shifts into PARK, the NEUTRAL.

  • Page 135: To Turn Off The Engine Using Engine Start/Stop Button

    STARTING AND OPERATING ENGINE BLOCK HEATER — IF EQUIPPED NOTE: NGINE SING ENGINE START/STOP B The engine block heater cord is a factory  UTTON The engine block heater warms the engine and installed option. If your vehicle is not equipped, permits quicker starts in cold weather.

  • Page 136: Parking Brake

    STARTING AND OPERATING While cruising, brief full-throttle acceleration within The parking brake is primarily intended to prevent If your foot is on the brake pedal while you apply the limits of local traffic laws contributes to a good the vehicle from rolling while parked. Before the parking brake, you may notice a small amount break-in.
  • Page 137 STARTING AND OPERATING disengages. You may also notice a small amount of CAUTION! WARNING! movement in the brake pedal. Once the parking brake is fully disengaged, the BRAKE warning lamp If the Brake System Warning Light remains on Never leave children alone in a vehicle, or with ...

  • Page 138: Automatic Transmission

    STARTING AND OPERATING Auto Park Brake When servicing your rear brakes, it may be WARNING! necessary for you or your technician to push the The Electric Park Brake (EPB) can be programmed rear piston into the rear caliper bore. With the You can be badly injured working on or around a to be applied automatically whenever the vehicle is Electric Park Brake (EPB) system, this can only be...

  • Page 139: Ignition Park Interlock

    STARTING AND OPERATING WARNING! WARNING! CAUTION! The transmission may not engage PARK if the When exiting the vehicle, always make sure Damage to the transmission may occur if the   vehicle is moving. Always bring the vehicle to a the ignition is in the OFF mode, remove the following precautions are not observed: complete stop before shifting to PARK, and...

  • Page 140: Brake/Transmission Shift Interlock (Btsi) System

    STARTING AND OPERATING NOTE: RAKE RANSMISSION HIFT In the event of a mismatch between the gear (BTSI) S NTERLOCK YSTEM selector position and the actual transmission gear (for example, driver selects PARK while driving), This vehicle is equipped with a BTSI that holds the the position indicator will blink continuously until transmission gear selector in PARK unless the the selector is returned to the proper position, or...
  • Page 141 STARTING AND OPERATING When parking on a hill, apply the parking brake WARNING! WARNING! before shifting the transmission to PARK. As an added precaution, turn the front wheels toward the The transmission may not engage PARK if the When exiting the vehicle, always make sure ...
  • Page 142 STARTING AND OPERATING The following indicators should be used to ensure During cold temperatures, transmission operation CAUTION! that you have properly engaged the transmission may be modified depending on engine and into the PARK position: transmission temperature as well as vehicle Towing the vehicle, coasting, or driving for any speed.

  • Page 143: All-Wheel Drive (Awd) - If Equipped

    STARTING AND OPERATING In the event of a momentary problem, the When the vehicle speed drops or during some CAUTION! transmission can be reset to regain all forward accelerations, the clutch automatically gears by performing the following steps: disengages. All wheels must have the same size and type tires.

  • Page 144: Stop/Start System - If Equipped

    STARTING AND OPERATING STOP/START SYSTEM — IF EQUIPPED If the Steering icon is displayed and the “POWER The engine will shut down, the tachometer will STEERING SYSTEM OVER TEMP” message is move to the zero position and the Stop/Start The Stop/Start function is developed to reduce displayed on the instrument cluster screen, this telltale will illuminate indicating you are in fuel consumption.

  • Page 145: To Start The Engine While In Autostop

    STARTING AND OPERATING HVAC is set to full defrost mode at a high blower TART NGINE HILE ANUALLY  speed. UTOSTOP TART YSTEM HVAC is set to MAX A/C.  While in a forward gear, the engine will start when Engine has not reached normal operating ...

  • Page 146: To Manually Turn On The Stop/Start System

    STARTING AND OPERATING CRUISE CONTROL SYSTEMS — IF EQUIPPED ANUALLY TART YSTEM Your vehicle may be equipped with the Cruise Control system, or the Adaptive Cruise Control After turning off the Stop/Start system, push the (ACC) system: Stop/Start OFF switch again (located on the switch bank).
  • Page 147 STARTING AND OPERATING To Activate To Vary The Speed Setting To Accelerate For Passing Push the on/off button to activate the Cruise To Increase Or Decrease The Set Speed Press the accelerator as you would normally. When Control. The cruise indicator light in the instrument the pedal is released, the vehicle will return to the When the Cruise Control is set, you can increase cluster display will illuminate.

  • Page 148: Adaptive Cruise Control (Acc) - If Equipped

    STARTING AND OPERATING To Resume Speed NOTE: WARNING! If the ACC sensor detects a vehicle ahead, ACC To resume a previously set speed, push the RES  The ACC system: will apply limited braking or accelerate (not to  button and release. Resume can be used at any exceed the original set speed) automatically to speed above 20 mph (32 km/h).
  • Page 149 STARTING AND OPERATING Adaptive Cruise Control Off WARNING! When ACC is deactivated, the display will read You should switch off the ACC system: “Adaptive Cruise Control Off.” When driving in fog, heavy rain, heavy snow, Adaptive Cruise Control Ready  sleet, heavy traffic, and complex driving situa- When ACC is activated but the vehicle speed tions (i.e., in highway construction zones).
  • Page 150 STARTING AND OPERATING Activating Adaptive Cruise Control (ACC) To turn the system off, push and release the WARNING! Adaptive Cruise Control (ACC) on/off button again. The minimum set speed for the ACC system is At this time, the system will turn off and the In the Fixed Speed Cruise Control mode, the 20 mph (32 km/h).
  • Page 151 STARTING AND OPERATING If you continue to accelerate beyond the set To Turn Off  WARNING! speed while ACC is enabled, the system will not The system will turn off and clear the set speed in be controlling the distance between your vehicle The Resume function should only be used if memory if: and the vehicle ahead.
  • Page 152 STARTING AND OPERATING Metric Speed (km/h) The ACC system maintains set speed when  driving uphill and downhill. However, a slight Pushing the SET (+), or SET (-) button once will  speed change on moderate hills is normal. In result in a 1 km/h speed adjustment.
  • Page 153 STARTING AND OPERATING If there is no vehicle ahead, the vehicle will NOTE: NOTE: maintain the set speed. If a slower moving vehicle The “BRAKE!” screen in the instrument cluster After the ACC system holds your vehicle at a stand- is detected in the same lane, the instrument display is a warning for the driver to take action still for approximately three consecutive minutes,...
  • Page 154 STARTING AND OPERATING This most often occurs at times of poor visibility, Do not remove any screws from the sensor. fog on the inside of glass. In these cases, the  such as in snow or heavy rain. The ACC system may Doing so could cause an ACC system malfunc- instrument cluster display will show “ACC/AEB also become temporarily blinded due to...
  • Page 155 STARTING AND OPERATING SERVICE ACC/FCW WARNING OFFSET DRIVING TURNS AND BENDS If the system turns off, and the instrument cluster ACC may not detect a vehicle in the same lane that When driving on a curve with ACC engaged, the displays “ACC/FCW Unavailable Service Required”...
  • Page 156 STARTING AND OPERATING USING ACC ON HILLS LANE CHANGING NARROW VEHICLES When driving on hills, ACC may not detect a vehicle ACC may not detect a vehicle until it is completely Some narrow vehicles traveling near the outer in your lane. Depending on the speed, vehicle load, in the lane in which you are traveling.

  • Page 157: Parksense Front/Rear Park Assist System - If Equipped

    STARTING AND OPERATING PARKSENSE FRONT/REAR PARK ASSIST STATIONARY OBJECTS AND VEHICLES Automatic brakes will not be available if there is  a faulted condition detected with the ParkSense ACC does not react to stationary objects and SYSTEM — IF EQUIPPED Park Assist system or the Braking System stationary vehicles.

  • Page 158: Parksense Sensors

    STARTING AND OPERATING The automatic braking function is intended to ENSE ENSORS ENSE ISPLAY assist the driver in avoiding possible collisions with The six ParkSense sensors (four when vehicle is The warning display will turn on indicating the detected obstacles when backing up in REVERSE not equipped with front sensors), located in the system status when the vehicle is in REVERSE or gear.
  • Page 159 STARTING AND OPERATING ParkSense Arcs 1 — No Tone/Solid Arc 6 — Fast Tone/Flashing Arc 2 — No Tone/Flashing Arc 7 — Fast Tone/Flashing Arc 3 — Fast Tone/Flashing Arc 8 — Slow Tone/Solid Arc 4 — Continuous Tone/Flashing Arc 9 —...
  • Page 160 STARTING AND OPERATING The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following charts show the warning alert operation when the system is detecting an obstacle: WARNING ALERTS FOR REAR Greater than Less than Rear Distance...

  • Page 161: Parksense Warning Display

    STARTING AND OPERATING WARNING ALERTS FOR FRONT Front Distance Greater than 47-39 inches 39-25 inches 25-12 inches Less than 12 inches (inches/cm) 47 inches (120 cm) (120-100 cm) (100-65 cm) (65-30 cm) (30 cm) Arcs — Left None None None 3rd Flashing 4th Flashing Arcs —...

  • Page 162: Enabling And Disabling Parksense

    STARTING AND OPERATING If "PARKSENSE UNAVAILABLE WIPE REAR NABLING ISABLING ENSE ERVICE ENSE SSIST SENSORS" or "PARKSENSE UNAVAILABLE WIPE YSTEM ParkSense can be enabled and disabled FRONT SENSORS" appears in the instrument with the ParkSense switch located cluster display make sure the outer surface and During vehicle start up, when the ParkSense below the Uconnect display.
  • Page 163 STARTING AND OPERATING When you turn ParkSense off, the instrument Use the ParkSense switch to turn the ParkSense   WARNING! cluster will display “PARKSENSE OFF.” Further- system off if objects such as bicycle carriers, more, once you turn ParkSense off, it remains trailer hitches, etc., are placed within 12 inches Before using ParkSense, it is strongly recom- ...

  • Page 164: Parksense Active Park Assist System - If Equipped

    STARTING AND OPERATING PARKSENSE ACTIVE PARK ASSIST SYSTEM The system may not work in all conditions (e.g. The ParkSense Active Park Assist system will turn  environmental conditions such as heavy rain, off automatically for any of the following — IF EQUIPPED snow, etc., or if searching for a parking space conditions: that has surfaces that will absorb the ultrasonic...

  • Page 165: Parallel/Perpendicular Parking Space Assistance Operation

    STARTING AND OPERATING The ParkSense Active Park Assist system will only ARALLEL ERPENDICULAR ARKING operate and search for a parking space when the PACE SSISTANCE PERATION following conditions are present: When the ParkSense Active Park Assist system is The gear selector is in DRIVE. ...
  • Page 166 STARTING AND OPERATING When searching for a parking space, the driver Once the vehicle is in position, you will be  should drive as parallel or perpendicular instructed to stop the vehicle’s movement and (depending on the type of maneuver) to other remove your hands from the steering wheel.

  • Page 167: Lanesense - If Equipped

    STARTING AND OPERATING NOTE: If the system is canceled during the maneuver  CAUTION! for any reason, the driver must take control of It is the driver's responsibility to use the brake  the vehicle. The vehicle must be driven slowly when using and accelerator during the semi-automatic ...

  • Page 168: Turning Lanesense On Or Off

    STARTING AND OPERATING When only a single lane marking is detected and When the LaneSense system senses the lane ENSE ARNING ESSAGE  the driver unintentionally drifts across that lane has been approached and is in a lane departure The LaneSense system will indicate the current marking (no turn signal applied), the LaneSense situation, the visual warning in the instrument lane drift condition through the instrument cluster...
  • Page 169 STARTING AND OPERATING Left Lane Departure — Both Lane Lines Detected When the LaneSense system senses a lane drift When the LaneSense system senses the lane   situation, the left inside and outside lane lines has been approached and is in a lane departure When the LaneSense system is on, the lane ...

  • Page 170: Changing Lanesense Status

    STARTING AND OPERATING NOTE: A touchscreen button to disable display of the HANGING ENSE TATUS camera image is made available when the vehicle The ParkView Rear Back Up Camera has program- The LaneSense system has settings to adjust the is not in REVERSE gear. Display of the camera mable modes of operation that may be selected intensity of the torque warning and the warning image after shifting out of REVERSE can be...

  • Page 171: Surround View Camera System - If Equipped

    STARTING AND OPERATING SURROUND VIEW CAMERA SYSTEM — When the vehicle is shifted out of REVERSE (with WARNING! camera delay turned on), the camera image will IF EQUIPPED continue to be displayed for up to 10 seconds Drivers must be careful when backing up even unless the vehicle speed exceeds 8 mph when using the ParkView Rear Back Up Camera.
  • Page 172 STARTING AND OPERATING When enabled, active guidelines are overlaid on Rear Cross Path View the image to illustrate the width of the vehicle, Pressing the Rear Cross Path soft key will including the side view mirrors and its projected give the driver a wider angle view of the backup path based on the steering wheel position.

  • Page 173: Famcam System - If Equipped

    STARTING AND OPERATING When Zoom View is selected while the vehicle is in The vehicle is in any gear other than REVERSE  CAUTION! REVERSE, then shifted to DRIVE, the camera delay and the “X” button is pressed. will display the standard Rear View. If the vehicle is To avoid vehicle damage, Surround View ...

  • Page 174: Refueling The Vehicle

    STARTING AND OPERATING NOTE: The display will show the entire vehicle cabin view 1. Put the vehicle in PARK and switch the on the left side of the display, and a zoomed-in ignition OFF. When FamCam is turned off, the selected seat in view of a selected seat on the right side of the the zoomed-in view on the right side of the display 2.

  • Page 175: Vehicle Loading

    STARTING AND OPERATING 7. To close the fuel filler door, push the Gross Vehicle Weight Rating (GVWR) Tire Size center-rear edge (3 o’clock position) of the fuel The GVWR is the total permissible weight of your The tire size on the Vehicle Certification Label filler door and then release.

  • Page 176: Trailer Towing

    STARTING AND OPERATING Loading OMMON OWING EFINITIONS CAUTION! The actual total weight and the weight of the front The following trailer towing related definitions will Do not load your vehicle any heavier than the and rear of your vehicle at the ground can best be assist you in understanding the following GVWR or the maximum front and rear GAWR.
  • Page 177 STARTING AND OPERATING Gross Axle Weight Rating (GAWR) Trailer Sway Control (TSC) Weight-Distributing Hitch The GAWR is the maximum capacity of the front The TSC can be a mechanical telescoping link that A Weight-distributing hitch works by applying and rear axles. Distribute the load over the front can be installed between the hitch receiver and the leverage through spring (load) bars.

  • Page 178: Trailer Hitch Classification

    STARTING AND OPERATING RAILER ITCH LASSIFICATION The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer Hitch Classification Definitions Class Max.

  • Page 179: Trailer Towing Weights

    STARTING AND OPERATING RAILER OWING EIGHTS AXIMUM RAILER EIGHT ATINGS The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Trailer Tow Engine/Transmission GCWR Frontal Area Maximum GTW Maximum Trailer TW Package 8,600 lb (3,900 kg) 40 sq ft (3.72 sq m) 3,600 lb (1,632 kg) 360 lb (163 kg)
  • Page 180 STARTING AND OPERATING Max Cargo With Max Tongue Load, Max Trailer 360 lb Number Of Persons / Weight Of Occupants Max Cargo No Trailer Trailer (136 kg) Tongue Load 1,205 lb (546 kg) – 1205 lb (546 kg) 360 lb (136 kg) = 845 lb (383 kg) 845 lb (383 kg) 2 People / 300 lb (136 kg)

  • Page 181: Trailer And Tongue Weight

    STARTING AND OPERATING RAILER ONGUE EIGHT OWING EQUIREMENTS WARNING! Never exceed the maximum tongue weight To promote proper break-in of your new vehicle When hauling cargo or towing a trailer, do not  stamped on your fascia/bumper or trailer hitch. drivetrain components, the following guidelines overload your vehicle or trailer.
  • Page 182 STARTING AND OPERATING Replacing tires with a higher load carrying  WARNING! WARNING! capacity will not increase the vehicle's GVWR and GAWR limits. Total weight must be distributed between the Towing any trailer will increase your stopping   tow vehicle and the trailer such that the distance.

  • Page 183: Towing Tips

    STARTING AND OPERATING NOTE: OWING Do not cut or splice wiring into the vehicle’s wiring Before towing, practice turning, stopping, and harness. backing up the trailer in an area located away from The electrical connections are all complete to the heavy traffic.

  • Page 184: Recreational Towing (Behind Motorhome)

    STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME) OWING EHICLE EHIND NOTHER EHICLE Towing Condition Wheel OFF The Ground FWD Models AWD Models Flat Tow NONE NOT ALLOWED NOT ALLOWED Front NOT ALLOWED Dolly Tow Rear NOT ALLOWED NOT ALLOWED On Trailer NOTE: Recreational Towing CAUTION!

  • Page 185: Driving Tips

    STARTING AND OPERATING DRIVING TIPS 4. Place the transmission in PARK. Traction 5. Turn the ignition OFF. When driving on wet or slushy roads, it is possible RIVING LIPPERY URFACES for a wedge of water to build-up between the tire 6.
  • Page 186 STARTING AND OPERATING Flowing/Rising Water WARNING! CAUTION! WARNING! Driving through standing water limits your Do not exceed 5 mph (8 km/h) when driving   vehicle’s traction capabilities. Do not exceed through standing water. This will minimize Do not drive on or across a road or path where 5 mph (8 km/h) when driving through wave effects.

  • Page 187: Uconnect Systems

    MULTIMEDIA UCONNECT SYSTEMS and performance of your systems or to reduce the NOTE: potential risk of unauthorized and unlawful access FCA US LLC or your dealer may contact you  For detailed information about your Uconnect to your vehicle systems. directly regarding software updates.

  • Page 188: Uconnect Settings

    MULTIMEDIA UCONNECT SETTINGS Push the Screen Off button on the faceplate to turn Press the Vehicle button, then press the Settings off the Uconnect screen. Push the button again or tab on the top of the touchscreen. In this menu, the The Uconnect system uses a combination of tap the screen to turn the screen on.
  • Page 189 MULTIMEDIA Display After pressing the Display button on the touchscreen, the following settings will be available: Setting Name Description This setting will change the language of the Uconnect system and Instrument Language Cluster Display. The available languages are English, Français, Español, and Italiano.
  • Page 190 MULTIMEDIA Setting Name Description This setting will display smartphone notifications and messages in the Phone Pop-Ups Displayed In Cluster Instrument Cluster Display. This setting will enable the Ready To Drive Pop-Ups in the Instrument Cluster Ready To Drive Pop-Ups — If Equipped Display.
  • Page 191 MULTIMEDIA Setting Name Description This setting adjusts the volume of the Front ParkSense system. The available Front ParkSense Volume — If Equipped settings are “Low”, “Medium”, and “High”. This setting adjusts the volume of the Rear ParkSense system. The available Rear ParkSense Volume —...
  • Page 192 MULTIMEDIA Setting Name Description This setting will allow you to set the brightness when the headlights are on. To Display Brightness Headlights On access this setting, Display Mode must be set to “Manual”. The “+” setting will increase the brightness; the “-” will decrease the brightness. This setting will allow you to set the brightness when the headlights are off.
  • Page 193 MULTIMEDIA Setting Name Description This setting will allow you to turn the voice recognition barge-in feature on or Voice Barge-in — If Equipped off. Show Command List — If Equipped This setting will allow the Command List to be shown on or off. This setting will keep certain electrical features running after the engine is Key Off Power Delay turned off.
  • Page 194 MULTIMEDIA Setting Name Description This setting will return all the previously changed settings to their factory Restore Settings to Default default. More Profile Options This setting will give access to more profile options. Safety & Driving Assistance After pressing the Safety & Driving Assistance button on the touchscreen, the following settings will be available: Setting Name Description This setting will change the distance at which the Forward Collision Warning...
  • Page 195 MULTIMEDIA Setting Name Description This setting will change the strength of the steering wheel feedback during a LaneSense Strength lane departure. The available settings are “Low”, “Medium”, and “High”. This setting will change the type of ParkSense alert when a close object is detected.
  • Page 196 MULTIMEDIA Clock & Date After pressing the Clock & Date button on the touchscreen, the following settings will be available: Setting Name Description This setting will sync the time to the GPS receiver in the system. The system Sync Time With GPS will control the time via the GPS location.
  • Page 197 MULTIMEDIA Phone/Bluetooth® When the Phone/Bluetooth® button is pressed on the touchscreen, the system displays the options related to Bluetooth® connectivity from an external audio device or smartphone. The list of paired audio devices or smartphones can be accessed from this menu. Setting Name Description This setting will activate phone message pop-ups in the Instrument Cluster...
  • Page 198 MULTIMEDIA Voice — If Equipped After pressing the Voice button on the touchscreen, the following settings will be available: Setting Name Description This setting will allow you to change the voice options for the radio to “Male” Voice Options or “Female”. This setting will allow you to turn the Command List on or off.
  • Page 199 MULTIMEDIA Camera When the Camera button is pressed on the touchscreen, the system displays the options related to the vehicle’s camera features. Setting Name Description This setting will add a timed delay to the Surround View Camera when shifting Surround View Camera Delay — If Equipped out of REVERSE.
  • Page 200 MULTIMEDIA Setting Name Description Rain Sensing Auto Wipers This setting will turn the Rain Sensing Auto Wipers on or off. Headlights With Wipers This setting will turn the headlights on when the wipers are activated. Lights When the Lights button is pressed on the touchscreen, the system displays the options related to the vehicle’s exterior and interior lights. NOTE: When the “Daytime Running Lights”...
  • Page 201 MULTIMEDIA Brakes After pressing the Brakes button on the touchscreen, the following settings will be available: Setting Name Description Auto Park Brake This setting will turn the Auto Park Brake on or off. Brake Service This setting will allow you to retract the brakes for servicing. Doors &...
  • Page 202 MULTIMEDIA Setting Name Description This setting will sound the horn when the Lock button is pushed on the key fob. The “Off” setting will not sound the horn when the Lock button is pushed. Sound Horn With Lock The “1st Press” setting will sound the horn when the Lock button is pushed once.
  • Page 203 MULTIMEDIA Setting Name Description This setting will flash the lights when the sliding door is opening. Selectable Flash Lights with Sliding Door options are “On” and “Off”. This setting will use hands-free technology to automatically open or close the Hands Free Power Liftgate power liftgate.
  • Page 204 MULTIMEDIA Key Off Options When the Key Off Options button is pressed on the touchscreen, the system displays the options related to vehicle shutoff. These settings will only activate when the ignition is set to OFF. Setting Name Description Easy Exit Seat This setting adjusts the seats to make exiting the vehicle easier.
  • Page 205 MULTIMEDIA Setting Name Description Surround Sound — If Equipped This setting will turn the Surround Sound system on or off. This setting will tune the audio levels from a device connected through the AUX Volume Offset AUX port. The available settings are “+” and “-”. Auto Play This setting will automatically begin playing audio from a connected device.
  • Page 206 MULTIMEDIA SiriusXM® Setup NOTE: A subscription to SiriusXM® satellite radio is required for these settings to be functional. When the SiriusXM® Setup button is pressed on the touchscreen, the system displays options related to SiriusXM® satellite radio. These settings can be used to skip specific radio channels and restart favorite songs from the beginning.
  • Page 207 MULTIMEDIA Software Updates When the Software Updates button is pressed on the touchscreen, the system will display information on updating the Uconnect system’s software. Setting Name Description This setting will allow software updates to happen over Wi-Fi. Selectable Software Downloads over Wi-Fi options for the setting are “On”...
  • Page 208 MULTIMEDIA Reset When the Reset button is pressed on the touchscreen, the system displays the options related to resetting the Uconnect system back to its default settings. These settings can clear personal data and reset selected settings from other menus. Setting Name Description Restart Radio...

  • Page 209: Uconnect Theater - Uconnect 5/5 Nav With 10.1-Inch Display (If Equipped)

    MULTIMEDIA UCONNECT THEATER — UCONNECT 5/5 NAV ETTING TARTED CCESSING YSTEM CONNECT YSTEM WITH 10.1-INCH DISPLAY (IF EQUIPPED) You can access your Uconnect Theater system CONNECT HEATER VERVIEW from the radio touchscreen following the steps below: Your Uconnect Theater is designed to give your Option 1 family years of enjoyment.

  • Page 210: Uconnect Theater Controls

    MULTIMEDIA NOTE: Parents can control certain features of the system CONNECT HEATER ONTROLS with the Uconnect Theater Controls screens, right A message asking if you would like to pair a remote from the Uconnect touchscreen radio. Options will pop up if one has not already been paired to include: the system.

  • Page 211: Pairing The Remote

    MULTIMEDIA 4. Press the Pair Remote option. Press the OK AIRING EMOTE NPAIRING EMOTE button. A touchscreen notification will appear In events such as updating the Uconnect Theater indicating that your remote has been paired software, or taking a remote to another vehicle, the successfully or unsuccessfully.

  • Page 212: Media Sources

    MULTIMEDIA 1. Screen Indicator — Indicates which screen EDIA OURCES CONNECT HEATER EMOTE ONTROL (1 or 2) is being controlled by the remote control. 2. Power Button — Turns the screen for the selected channel on or off. 3. Back Button — Push to exit out of menus or return to previous screen.

  • Page 213: Uconnect Theater Home Screen And Controls

    MULTIMEDIA CONNECT HEATER CREEN 10. Arrow Buttons — Push the Arrow buttons to highlight an item or scroll through ONTROLS menus. 11. Fast Forward Button — Push and hold to fast forward through the current audio track or video chapter. Push once to skip to the next track.

  • Page 214: Play A Dvd/Blu-Ray™ Or Usb Media File From Uconnect System

    MULTIMEDIA A DVD/B ™ O General Settings 5. To play a DVD/Blu-ray™ disc on both screens simultaneously, select Disc from both screen To change source card order, select “Source Card EDIA CONNECT YSTEM drop downs, or choose Disc Source on one Reorder”, then press and hold source card on the screen and push the View Screen button on 1.
  • Page 215 MULTIMEDIA NOTE: 3. Lock After selecting “Press to Enter” or the Movie Press to enable/disable Remote Control Snapshot, the control functions for that screen functions and Rear Touchscreen Controls appear. These controls only apply to the individual for the selected source. screen selected and include: 1.

  • Page 216: Disc Menu

    MULTIMEDIA these buttons can be used. The 5-way control CONNECT HEATER buttons located to the right of the four colored When listening to a CD Audio disc, CD Data disc, buttons, are used to navigate and select items in DVD, or Blu-ray™, pushing the remote control’s the disc’s menu, like play movie, scene selection, Arrow buttons will navigate the cursor on the rear etc.
  • Page 217 MULTIMEDIA Select the Apps source card to play preloaded Are We There Yet? — Uconnect 5 NAV When a navigation route has been set from the games. Pressing the Help button teaches users Uconnect system, the second row passengers can how to play each game.

  • Page 218: Using The Rear Video Usb Port

    MULTIMEDIA USB P SING IDEO IDEO AMES EADPHONES PERATION Plug in a USB drive or mass storage device and Connect the video game console to the HDMI 1 or The headphones receive two separate channels of play your favorite music or movies. 2 ports, located behind the first row seat.
  • Page 219 MULTIMEDIA Changing The Audio Mode For Headphones Replacing The Headphone Batteries 1. Ensure the remote control and the Each set of headphones requires two AAA batteries headphones are on the same channel. for operation. 2. Push the Home button on the remote control. To replace the batteries: 3.

  • Page 220: Display Settings

    MULTIMEDIA If you have any questions or comments regarding What Does This Warranty Not Cover? This warranty If the screen is closed and there is no audio heard, does not cover any damage or defect that results your Aptiv wireless headphones, please email verify that the headphones are turned on (the ON from misuse, abuse or modification of the Product hpservice@aptiv.com or phone: 888-293-3332.
  • Page 221 MULTIMEDIA Icon Description Climate Control ON Button Press and release this button to turn the Rear Climate Controls. Climate Control OFF Button Press and release this button to turn the Rear Climate Controls off. AUTO Button Automatically controls the rear interior cabin temperature by adjusting airflow distribution and amount. Toggling this function will cause the system to switch between Manual mode and Automatic mode.

  • Page 222: Accessibility - If Equipped

    MULTIMEDIA Icon Description Floor Mode Floor Mode Air comes from the floor outlets. Blower Control Blower Control is used to regulate the amount of air forced through the climate system. There are seven blower speeds available. Adjusting the blower will cause Automatic mode to switch to Manual operation. —...
  • Page 223 MULTIMEDIA NOTE: 4. When prompted by an Authentication Screen, NOTE: For system compatibility, consult your device's press Accept on the touchscreen to begin Some devices will allow you to control your  www.uconnectphone.com wireless streaming on your device. If Owner's Manual or device through the Uconnect Theater rear prompted, verify that the code on the rear see if your device supports wireless streaming...

  • Page 224: Bd And Dvd Region Codes

    MULTIMEDIA BD A DVD R Settings For CD Data (or CD-ROM) discs, always use the EGION ODES  ISO-9660 (Level 1 or Level 2), Joliet, or Romeo Below is a list of the settings available for the Many BD and DVD discs are coded by geographic format.

  • Page 225: Product Agreement

    MULTIMEDIA The Blu-ray™ Disc player always uses the file To change the current file, use the remote until a safe temperature is reached. This shutdown   is necessary to protect the optics of the Blu-ray™ extension to determine the audio format, so control “Seek Forward”...
  • Page 226 MULTIMEDIA You have the right of acquisition, modification, and distribution of the source code of the GPL/LGPL software. These are distributed in the hope that it will be useful by itself. However, including the absence of an implied warranty on the "suitability for a particular purpose" or "merchantability", the warranty of any kind will not be made.

  • Page 227: Fcc/Ic Regulatory Notices

    MULTIMEDIA MPEG Cinavia WARNING! THIS PRODUCT IS LICENSED UNDER THE AVC "Cinavia Notice This product uses Cinavia Use of controls or adjustments or performance PATENT PORTFOLIO LICENSE FOR THE PERSONAL technology to limit the use of unauthorized copies of procedures other than those specified herein AND NON-COMMERCIAL USE OF A CONSUMER TO of some commercially-produced film and videos may result in hazardous radiation exposure.

  • Page 228: Radio Operation And Mobile Phones

    MULTIMEDIA FCC Class B Digital Device Notice CAN ICES-3 (B) / NMB-3 (B) The internal wireless radio operates within guidelines found in radio frequency safety This equipment has been tested and found to This Class B digital apparatus complies with standards and recommendations, which reflect comply with the limits for a Class B digital device, Canadian ICES-003...

  • Page 229: Safety Features

    SAFETY SAFETY FEATURES The ABS is designed to function with the Original WARNING! Equipment Manufacturer (OEM) tires. Modification (ABS) may result in degraded ABS performance. The ABS cannot prevent collisions, including RAKE YSTEM  those resulting from excessive speed in turns, The ABS provides increased vehicle stability and WARNING! following another vehicle too closely, or hydro-...

  • Page 230: Electronic Brake Control (Ebc) System

    SAFETY Brake Assist System (BAS) Brake System Warning Light If the ABS Warning Light is on, the brake system should be serviced as soon as possible to restore The BAS is designed to optimize the vehicle’s The red Brake System Warning Light will turn on the benefits of anti-lock brakes.
  • Page 231 SAFETY NOTE: Electronic Roll Mitigation (ERM) Electronic Stability Control (ESC) The DST feature is only meant to help the driver ERM anticipates the potential for wheel lift by ESC enhances directional control and stability of realize the correct course of action through small monitoring the driver’s steering wheel input and the vehicle under various driving conditions.
  • Page 232 SAFETY The ESC Activation/Malfunction Indicator Light ESC On WARNING! located in the instrument cluster will start to flash This is the normal operating mode for the ESC. as soon as the ESC system becomes active. The Vehicle modifications, or failure to properly ...
  • Page 233 SAFETY The ESC Activation/Malfunction Indicator Light Hill Start Assist (HSA) WARNING! starts to flash as soon as the tires lose traction and HSA is designed to mitigate roll back from a the ESC system becomes active. The ESC When in “Partial Off” mode, the TCS function- ...
  • Page 234 SAFETY Ready Alert Braking (RAB) WARNING! WARNING! RAB may reduce the time required to reach full There may be situations where the Hill Start If you use a trailer brake controller with your  braking during emergency braking situations. It Assist (HSA) will not activate and slight rolling trailer, the trailer brakes may be activated and anticipates when an emergency braking situation...

  • Page 235: Auxiliary Driving Systems

    SAFETY AUXILIARY DRIVING SYSTEMS Trailer Sway Control (TSC) The BSM detection zone covers approximately one lane width on both sides of the vehicle 12 ft TSC uses sensors in the vehicle to recognize an (BSM) — (3.7 m). The zone length starts at the outside LIND ONITORING excessively swaying trailer and will take the...
  • Page 236 SAFETY The area on the rear fascia/bumper where the If the blockage message is still present after The BSM system monitors the detection zone from radar sensors are located must remain free of cycling the ignition and driving in traffic, check three different entry points (side, rear, front) while snow, ice, and dirt/road contamination so that the again for a blockage.
  • Page 237 SAFETY Entering From The Rear The BSM system will not alert you of objects that are traveling in the opposite direction of the vehicle Vehicles that come up from behind your vehicle on in adjacent lanes page 371. Ú either side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h).
  • Page 238 SAFETY Rear Cross Path (RCP) NOTE: Blind Spot Modes In a parking lot situation, oncoming vehicles can be RCP is intended to aid the driver when backing out Three selectable modes of operation are available blocked by vehicles parked on either side. If the of parking spaces where their vision of oncoming in the Uconnect system.

  • Page 239: Forward Collision Warning (Fcw) With Mitigation - If Equipped

    SAFETY When the system is in RCP, the system shall NOTE: respond with both visual and audible alerts when a FCW monitors the information from the forward detected object is present. Whenever an audible looking sensors as well as the Electronic Brake alert is requested, the radio is also muted.
  • Page 240 SAFETY NOTE: NOTE: It is unsafe to test the FCW system. To prevent  such misuse of the system, after four Active The FCW system state is kept in memory from Changing the FCW status to “Only Warning”   Braking events within a key cycle, the Active one key cycle to the next.

  • Page 241: Tire Pressure Monitoring System (Tpms)

    SAFETY Once the condition that limited the system seconds and then release the brakes. When the Changing the PEB status to “Off” deactivates the performance is no longer present, the system will system determines a collision with the pedestrian system, so no warning or active braking will be return to its full performance state.
  • Page 242 SAFETY The tire pressure will vary with temperature by The system will automatically update and the CAUTION! approximately 1 psi (7 kPa) for every 12°F (6.5°C). TPMS Warning Light will turn off once the system This means that when the outside temperature receives the updated tire pressures.
  • Page 243 SAFETY NOTE: NOTE: If the ignition is cycled, this sequence will repeat, It is particularly important for you to check the tire providing the system fault still exists. If the system The TPMS is not intended to replace normal tire ...
  • Page 244 SAFETY TIRE PRESSURE MONITORING SYSTEM LOW 3. After driving the vehicle for up to 20 minutes graphic display in the instrument cluster will return above 15 mph (24 km/h), the TPMS Warning to their original color, and the TPMS Warning Light PRESSURE WARNINGS Light will flash on and off for 75 seconds and will turn off.

  • Page 245: Occupant Restraint Systems

    SAFETY To reactivate the TPMS, replace all four wheel and 7. The driver and front passenger seats should MPORTANT AFETY RECAUTIONS tire assemblies (road tires) with tires equipped with be moved back as far as practical to allow the Please pay close attention to the information in TPMS sensors.

  • Page 246: Seat Belt Systems

    SAFETY Change Of Status Initial Indication YSTEMS If the driver is unbuckled when the ignition switch If the driver or outboard front seat passenger (if Buckle up even though you are an excellent driver, is first in the START or ON/RUN position, a chime equipped with outboard front passenger seat even on short trips.
  • Page 247 SAFETY Lap/Shoulder Belts WARNING! WARNING! All seating positions in your vehicle are equipped A lap belt worn too high can increase the risk It is dangerous to ride in a cargo area, inside   with lap/shoulder belts. or outside of a vehicle. In a collision, people of injury in a collision.
  • Page 248 SAFETY Lap/Shoulder Belt Operating Instructions WARNING! 1. Enter the vehicle and close the door. Sit back A seat belt that is worn under your arm is  and adjust the seat. dangerous. Your body could strike the inside 2. The seat belt latch plate is above the back of surfaces of the vehicle in a collision, the front seat, and next to your arm in the rear increasing head and neck injury.
  • Page 249 SAFETY 5. Position the shoulder belt across the shoulder Adjustable Upper Shoulder Belt Anchorage NOTE: and chest with minimal, if any slack so that it The adjustable upper shoulder belt anchorage is In the front and second row outboard seats the is comfortable and not resting on your neck.
  • Page 250 SAFETY Second Row Center (If Equipped) And Third 2. Grab the mini-latch plate and pull the seat belt over the seat. Row Center Seat Belt Operating Instructions The second row center (if equipped) and third row center seat belts feature a seat belt with a mini-latch plate and buckle, which allows the seat belt to detach from the lower anchor when the seat is folded.
  • Page 251 SAFETY 5. Sit back in seat. Slide the regular latch plate up 10. To disengage the mini-latch plate from the mini-buckle for storage, insert the regular latch the webbing as far as necessary to allow the seat belt to go around your lap. plate into the center red slot on the mini-buckle.
  • Page 252 SAFETY Place the shoulder belt across the chest and away WARNING! WARNING! from the neck. Never place the shoulder belt behind the back or under the arm. When reattaching the mini-latch plate and Using a Seat Belt Extender when not needed ...
  • Page 253 SAFETY Switchable Automatic Locking Retractors If the passenger seating position is equipped with an ALR and is being used for normal usage, only (ALR) pull the seat belt webbing out far enough to If applicable, refer to the “Hybrid Supplement” for comfortably wrap around the occupant’s additional information.
  • Page 254 SAFETY How To Disengage The Automatic Locking Mode portion of the belt and install the car seat normally. WARNING! When the car seat is removed from the vehicle, Unbuckle the combination lap/shoulder belt and slide the latch plate above the park stitch to enable Never place a rear-facing child restraint in ...

  • Page 255: Supplemental Restraint Systems (Srs)

    SAFETY The air bag system must be ready to protect you in Air Bag Warning Light a collision. The Occupant Restraint Controller The Occupant Restraint Controller (ORC) (ORC) monitors the internal circuits and monitors the readiness of the electronic interconnecting wiring associated with the parts of the air bag system whenever the electrical Air Bag System Components.
  • Page 256 SAFETY Front Air Bags The ORC also includes diagnostics that will WARNING! illuminate the instrument panel Air Bag Warning This vehicle has front air bags and lap/shoulder Light if a malfunction is detected that could affect Ignoring the Air Bag Warning Light in your belts for both the driver and front passenger.
  • Page 257 SAFETY The first stage inflator is triggered immediately WARNING! WARNING! during an impact that requires air bag deployment. A low energy output is used in less severe Being too close to the steering wheel or instru- Do not put anything on or around the air bag ...
  • Page 258 SAFETY Occupant Classification System (OCS) — On the other hand, depending on the type and The ORC may reduce the inflation rate of the location of impact, front air bags may deploy in Passenger Advanced Front Air Bag deployment Front Passenger Seat crashes with little vehicle front-end damage but based on occupant classification.
  • Page 259 SAFETY Front Passenger Seat Occupant Status Front Passenger Air Bag Output Rear-facing child restraint Reduced-power deployment Child, including a child in a forward-facing child restraint or booster seat* Reduced-power deployment OR Full-power deployment Properly seated adult Full-power deployment OR reduced-power deployment Unoccupied seat Reduced-power deployment The OCS determines the front passenger’s most...
  • Page 260 SAFETY Failure to do so may result in serious injury or Objects are lodged between the front passenger  death. The OCS determines the most probable seat and center console. classification of the occupant that it detects. The Accessories that may change the seated weight ...
  • Page 261 SAFETY The passenger seat assembly contains critical OCS WARNING! components that may affect the Passenger Advanced Front Air Bag inflation. In order for the Do not carry or hold any objects (e.g., back-  OCS to properly classify the seated weight of a packs, boxes, etc.) while seated in the front front seat passenger, the OCS components must passenger seat.
  • Page 262 SAFETY Supplemental Driver And Front Passenger WARNING! Knee Air Bags Unapproved modifications or service proce-  This vehicle is equipped with a Supplemental dures to the passenger seat assembly, its Driver Knee Air Bag mounted in the instrument related components, seat cover or cushion panel below the steering column and a may inadvertently change the air bag deploy- Supplemental Passenger Knee Air Bag mounted in...
  • Page 263 SAFETY Supplemental Side Air Bag Inflatable Curtains The SABIC deploys downward, covering the side Side Impacts (SABICs) windows. An inflating SABIC pushes the outside The Side Air Bags are designed to activate in edge of the headliner out of the way and covers the certain side impacts.
  • Page 264 SAFETY Rollover Events WARNING! WARNING! Side Air Bags and seat belt pretensioners are Occupants, including children, who are up Side Air Bags need room to inflate. Do not lean   designed to activate in certain rollover events. The against or very close to Side Air Bags can be against the door or window.
  • Page 265 SAFETY Air Bag System Components If A Deployment Occurs For nose or throat irritation, move to fresh air. If the irritation continues, see your doctor. If these The front air bags are designed to deflate NOTE: particles settle on your clothing, follow the immediately after deployment.
  • Page 266 SAFETY Enhanced Accident Response System Enhanced Accident Response System Cut off battery power to the:  Reset Procedure Engine In the event of an impact, if the communication  network remains intact, and the power remains Electric Motor (if equipped) If applicable, refer to the “Hybrid Supplement”...
  • Page 267 SAFETY Maintaining Your Air Bag System Event Data Recorder (EDR) WARNING! This vehicle is equipped with an event data WARNING! Do not attempt to modify any part of your air  recorder (EDR). The main purpose of an EDR is to bag system.

  • Page 268: Child Restraints

    SAFETY These data can help provide a better There are different sizes and types of restraints for HILD ESTRAINTS understanding of the circumstances in which children from newborn size to the child almost Everyone in your vehicle needs to be buckled up at crashes and injuries occur.
  • Page 269 SAFETY Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Children who are two years old or younger and who Either an Infant Carrier or a Convertible Child Infants and Toddlers have not reached the height or weight limits of their Restraint, facing rearward in a rear seat of the child restraint...
  • Page 270 SAFETY Older Children And Child Restraints WARNING! WARNING! Children who are two years old or who have Do not install a rear-facing car seat using a rear Improper installation can lead to failure of an  outgrown their rear-facing convertible child seat support leg in this vehicle.
  • Page 271 SAFETY Children Too Large For Booster Seats If the answer to any of these questions was “no,” WARNING! then the child still needs to use a booster seat in Children who are large enough to wear the this vehicle. If the child is using the lap/shoulder Never allow a child to put the shoulder belt shoulder belt comfortably, and whose legs are long belt, check seat belt fit periodically and make sure...
  • Page 272 SAFETY Recommendations For Attaching Child Restraints Use Any Attachment Method Shown With An “X” Below Combined Weight of Restraint Type the Child + Child LATCH – Lower Anchors LATCH – Lower Anchors Seat Belt + Top Tether Seat Belt Only Restraint Only + Top Tether Anchor...
  • Page 273 SAFETY LATCH Positions For Installing Child Restraints In This Vehicle If applicable, refer to the “Hybrid Supplement” for additional information. 7 Passenger Stow ‘n Go Seating LATCH Positions 8 Passenger LATCH Positions Lower Anchorage Symbol 2 anchorages per Lower Anchorage Symbol 2 anchorages per seating position seating position Top Tether Anchorage Symbol...
  • Page 274 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH Use the LATCH anchorage system until the combined weight of the child and What is the weight limit (child’s weight + weight of the child restraint is 65 lbs (29.5 kg). Use the seat belt and tether anchor the child restraint) for using the LATCH anchorage 65 lbs (29.5 kg) instead of the LATCH system once the combined weight is more than 65 lbs...
  • Page 275 SAFETY Locating The LATCH Anchorages WARNING! If applicable, refer to the “Hybrid Supplement” for Always make sure the head restraint is in its additional information. upright position when the seat is to be used by The lower anchorages are round bars an occupant who is not in a child restraint.
  • Page 276 SAFETY Locating The Upper Tether Anchorages If applicable, refer to the “Hybrid Supplement” for additional information. There are tether strap anchorages located behind all second row seating positions. The third row has a tether anchor on the 40% seat for the right outboard position and in the center of the 60% seat for either the center or left outboard seating position.
  • Page 277 SAFETY Center Seat LATCH 1. Loosen the adjusters on the lower straps and WARNING! on the tether strap of the child seat so that This vehicle has 4 lower LATCH anchorages in the you can more easily attach the hooks or Use anchorages C and D to install a ...
  • Page 278 SAFETY How To Stow An Unused Switchable-ALR WARNING! WARNING! (ALR) Seat Belt: Improper installation of a child restraint to the Improper installation or failure to properly   When using the LATCH attaching system to install LATCH anchorages can lead to failure of the secure a child restraint can lead to failure of a child restraint, stow all ALR seat belts that are not restraint.
  • Page 279 SAFETY Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle If applicable, refer to the “Hybrid Supplement” for additional information. 7 Passenger Stow ‘n Go Seating Automatic Locking 8 Passenger Automatic Locking Retractor (ALR) Locations Retractor (ALR) Locations ALR — Switchable Automatic Locking Retractor ALR —...
  • Page 280 SAFETY Frequently Asked Questions What is the weight limit (child’s weight + weight of the child restraint) Always use the tether anchor when using the seat belt to install a forward for using the Tether Anchor with the Weight limit of the Child Restraint facing child restraint, up to the recommended weight limit of the child seat belt to attach a forward facing restraint.
  • Page 281 SAFETY 3. Slide the latch plate into the buckle until you WARNING! hear a “click.” Improper installation or failure to properly  4. Pull on the webbing to make the lap portion secure a child restraint can lead to failure of tight against the child seat.
  • Page 282 SAFETY Installing Child Restraints Using the Top 8. If the child restraint has a top tether strap and the seating position has a top tether Tether Anchorage anchorage, connect the tether strap to the If applicable, refer to the “Hybrid Supplement” for anchorage and tighten the tether strap.
  • Page 283 SAFETY 1. Look behind the seating position where you 2. Route the tether strap to provide the most plan to install the child restraint to find the direct path for the strap between the anchor tether anchorage. You may need to move the and the child seat.

  • Page 284: Safety Tips

    SAFETY 3. Attach the tether strap hook of the child WARNING! WARNING! restraint to the top tether anchorage as shown in the diagram. An incorrectly anchored tether strap could Do not connect the tether strap for more than  lead to increased head motion and possible one child restraint to the tether anchorage on 4.

  • Page 285: Transporting Pets

    SAFETY Air Bag Warning Light Floor Mat Safety Information RANSPORTING Always use floor mats designed to fit your vehicle. The Air Bag Warning Light will turn on for four to Air Bags deploying in the front seat could harm Only use a floor mat that does not interfere with the eight seconds as a bulb check when the ignition your pet.

  • Page 286: Periodic Safety Checks You Should Make Outside The Vehicle

    SAFETY ERIODIC AFETY HECKS HOULD WARNING! WARNING! UTSIDE EHICLE ONLY install floor mats designed to fit your NEVER place any objects under the floor mat   Tires vehicle. NEVER install a floor mat that cannot (e.g., towels, keys, etc.). These objects could be properly attached and secured to your change the position of the floor mat and may Examine tires for excessive tread wear and uneven...

  • Page 287: Exhaust Gas

    SAFETY The best protection against carbon monoxide entry XHAUST ARBON ONOXIDE ARNINGS into the vehicle body is a properly maintained engine exhaust system. WARNING! WARNING! Whenever a change is noticed in the sound of the Exhaust gases can injure or kill. They contain Carbon monoxide (CO) in exhaust gases is exhaust system, when exhaust fumes can be carbon monoxide (CO), which is colorless and...

  • Page 288: Hazard Warning Flashers

    IN CASE OF EMERGENCY HAZARD WARNING FLASHERS When you must leave the vehicle to seek WARNING! assistance, the Hazard Warning Flashers will The Hazard Warning Flashers button is located in continue to operate even though the ignition is ALWAYS obey traffic laws and pay attention to the lower center area of the instrument panel.
  • Page 289 IN CASE OF EMERGENCY ASSIST Call 2. The LED light located between the SOS and NOTE: ASSIST buttons on the Rearview Mirror will The ASSIST Button is used to automatically Your vehicle may be transmitting data as  turn green once a connection to a SOS authorized by the subscriber.
  • Page 290 IN CASE OF EMERGENCY SOS Call System Limitations WARNING! WARNING! Vehicles sold in Mexico DO NOT have SOS Call If anyone in the vehicle could be in danger The SOS Call system is embedded into the   system capabilities. (e.g., fire or smoke is visible, dangerous road vehicle’s electrical system.
  • Page 291 IN CASE OF EMERGENCY LTE (voice/data) or 4G (data) network and/or NOTE:  WARNING! Global Positioning Satellite signals are unavail- Your vehicle may be transmitting data as autho-  able or obstructed Ignoring the Rearview Mirror light could mean  rized by the subscriber.

  • Page 292: Jacking And Tire Changing - If Equipped

    IN CASE OF EMERGENCY JACKING AND TIRE CHANGING — NOTE: WARNING! Passengers should not remain in the vehicle when IF EQUIPPED the vehicle is being lifted or raised. Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far PARE OCATION WARNING!
  • Page 293 IN CASE OF EMERGENCY 2. Unlatch the Portable Air Compressor or Tire 3. Remove Jack by turning the jack screw Service Kit if equipped. Unscrew the wing nut counterclockwise to collapse from storage that is holding the Inflatable Spare Tire and area that is located behind the tire.

  • Page 294: Jacking Instructions

    IN CASE OF EMERGENCY ACKING NSTRUCTIONS WARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: Always park on a firm, level surface as far from  the edge of the roadway as possible before raising the vehicle.
  • Page 295 IN CASE OF EMERGENCY Jacking Locations Front Jack Location Rear Jacking Location WARNING! Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack.
  • Page 296 IN CASE OF EMERGENCY NOTE: 3. Place the wrench on the jack screw and turn WARNING! clockwise until the jack head is properly Do not install the wheel cover on the inflatable engaged in the described location. Do not spare tire. To avoid the risk of forcing the vehicle off the raise the vehicle until you are sure the jack is jack, do not tighten the wheel nuts fully until the...

  • Page 297: Road Tire Installation

    IN CASE OF EMERGENCY WARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided. Have the deflated (flat) tire repaired or replaced immediately.

  • Page 298: Portable Air Compressor - If Equipped

    IN CASE OF EMERGENCY — 4. Install the remaining lug nuts with the cone Portable Air Compressor Usage With Inflatable ORTABLE OMPRESSOR shaped end of the nut toward the wheel. Spare Tire QUIPPED Lightly tighten all the lug nuts until the wheel 1.

  • Page 299: Return Inflatable Spare Tire

    IN CASE OF EMERGENCY TIRE SERVICE KIT — IF EQUIPPED NOTE: ETURN NFLATABLE PARE If the tire is overinflated, use the deflation button To return Inflatable Spare Tire to its storage Your vehicle may be equipped with a Tire Service to reduce the tire air pressure.
  • Page 300 IN CASE OF EMERGENCY Tire Service Kit And Components And Operation Selecting Air Mode The Sealant Bottle is a one tire application use   and needs to be replaced after each use. Always Push in the Mode Select Knob and replace these components immediately at your turn to this position for air pump oper- original equipment vehicle dealer.
  • Page 301 IN CASE OF EMERGENCY Sealing A Tire With Tire Service Kit WARNING! WARNING! Whenever You Stop To Use Tire Service Kit: Do not attempt to seal a tire on the side of the A loose Tire Service Kit thrown forward in a ...
  • Page 302 IN CASE OF EMERGENCY Setting Up To Use Tire Service Kit: 3. After pushing the Power Button, If the sealant (white fluid) does flow through the the sealant (white fluid) will flow from Sealant Hose: 1. Uncoil the Sealant Hose and then remove the the Sealant Bottle through the cap from the fitting at the end of the hose.
  • Page 303 IN CASE OF EMERGENCY If the tire inflates to the recommended pressure or NOTE: WARNING! is at least 26 psi (1.8 Bar) pressure within If tire has improper inflation follow the steps below 15 minutes: The Tire Service Kit is not a permanent flat tire 1.
  • Page 304 IN CASE OF EMERGENCY If the tire pressure is 19 psi (1.3 Bar) or higher: Sealant Bottle Replacement: 1. Push the Power Button to turn on 1. Unwrap the power cord. Tire Service Kit and inflate the tire to 2. Unwrap the hose. the cold tire inflation pressure found on the tire and loading information label located in the driver-side door opening.

  • Page 305: Jump Starting

    IN CASE OF EMERGENCY JUMP STARTING REPARATIONS TART The battery in your vehicle is located on the left If your vehicle has a discharged battery it can be side of the engine compartment. jump started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack.

  • Page 306: Jump Starting Procedure

    IN CASE OF EMERGENCY 4. Connect the opposite end of the negative (-) TARTING ROCEDURE WARNING! jumper cable to the remote negative (-) post near the windshield cowl (exposed metallic/ Do not allow vehicles to touch each other as this WARNING! unpainted post of the discharge vehicle).

  • Page 307: Refueling In Emergency - If Equipped

    IN CASE OF EMERGENCY 3. Disconnect the positive (+) end of the jumper NOTE: Emergency Gas Can Refueling cable from the positive (+) post of the booster In certain cold conditions, ice may prevent the fuel Most gas cans will not open the flapper doors. A battery.

  • Page 308: If Your Engine Overheats

    IN CASE OF EMERGENCY NOTE: WARNING! CAUTION! There are steps that you can take to slow down an impending overheat condition: Never have any smoking materials lit in or Driving with a hot cooling system could damage  near the vehicle when the fuel door is open or your vehicle.
  • Page 309 IN CASE OF EMERGENCY To move the vehicle in cases where the 3. Using a small screwdriver or similar tool, NOTE: transmission will not shift out of PARK (P) (such as remove the Manual Park Release access When the lever is locked in the released position, a depleted battery), a Manual Park Release is cover, which is to the lower left of the steering the tether will remain outside of the trim panel and...

  • Page 310: Freeing A Stuck Vehicle

    IN CASE OF EMERGENCY FREEING A STUCK VEHICLE NOTE: CAUTION! Push the ESC OFF button to place the Electronic If your vehicle becomes stuck in mud, sand or Stability Control (ESC) system in “Partial Off” Racing the engine or spinning the wheels may ...

  • Page 311: Towing A Disabled Vehicle

    IN CASE OF EMERGENCY TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. Towing Condition Wheels OFF The Ground FWD MODELS AWD MODELS If transmission is operable: • Transmission in NEUTRAL Flat Tow NONE NOT ALLOWED...
  • Page 312 IN CASE OF EMERGENCY NOTE: Vehicle Recovery Tow Points CAUTION! You must ensure that the Auto Park Brake Your vehicle is equipped with Vehicle Recovery  Recovery feature: feature is disabled before towing this vehicle (if Points that can be used to recover a disabled rear wheels are on the ground), to avoid inadver- vehicle, located on the underbody of the vehicle.

  • Page 313: All Wheel Drive (Awd) Models

    IN CASE OF EMERGENCY ENHANCED ACCIDENT RESPONSE SYSTEM (AWD) M If you must use the accessories (wipers, HEEL RIVE ODELS defrosters, etc.) while being towed, the ignition (EARS) FCA US LLC recommends towing your vehicle with must be in the ON/RUN mode, not the ACC mode. all four wheels OFF the ground using a flatbed.

  • Page 314: Servicing And Maintenance

    SERVICING AND MAINTENANCE SCHEDULED SERVICING An authorized dealer will reset the oil change Once A Month Or Before A Long Trip: indicator message after completing the scheduled Check engine oil level.  Your vehicle is equipped with an automatic oil oil change.

  • Page 315: Maintenance Plan

    SERVICING AND MAINTENANCE AINTENANCE Refer to the Maintenance Plan for required maintenance. At Every Oil Change Interval As Indicated By Oil Change Indicator System: Change oil and filter.  Rotate the tires at the first sign of irregular wear, even if it occurs before the oil indicator system turns on. ...
  • Page 316 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV/Universal joints. Inspect front suspension, boot seals, tie rod ends, and replace if necessary. Inspect the brake linings, parking brake function. Inspect front accessory drive tensioner, idler pulley, and replace if necessary.
  • Page 317 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Maintenance Replace engine air cleaner filter. Replace cabin air filter. Replace spark plugs. Replace the front accessory drive belt. Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first.

  • Page 318: Engine Compartment

    SERVICING AND MAINTENANCE ENGINE COMPARTMENT 3.6L E NGINE 1 — Engine Coolant Pressure Cap 5 — Power Distribution Center (Fuses) 2 — Engine Oil Fill 6 — Battery 3 — Brake Fluid Reservoir Cap 7 — Engine Oil Dipstick 4 — Engine Air Cleaner Filter 8 —...

  • Page 319: Checking Oil Level

    SERVICING AND MAINTENANCE To prevent freeze-up of your windshield washer HECKING EVEL CAUTION! system in cold weather, select a solution or mixture To ensure proper engine lubrication, the engine oil that meets or exceeds the temperature range of Overfilling or underfilling the crankcase will must be maintained at the correct level.

  • Page 320: Pressure Washing

    SERVICING AND MAINTENANCE RESSURE ASHING WARNING! WARNING! Cleaning the engine compartment with a high You can be badly injured working on or around a Battery gas is flammable and explosive. Keep  pressure washer is not recommended. motor vehicle. Only do service work for which flame or sparks away from the battery.

  • Page 321: Engine Oil Filter

    SERVICING AND MAINTENANCE Disposing Of Used Engine Oil And Oil NGINE LEANER ILTER CAUTION! Filters For the proper maintenance intervals page 313. Ú Do not use chemical flushes in your engine oil as Care should be taken in disposing of used engine the chemicals can damage your engine.

  • Page 322: Accessory Drive Belt Inspection

    SERVICING AND MAINTENANCE NOTE: CCESSORY RIVE NSPECTION Identify and correct problem before new belt is installed WARNING! Noise (objectionable squeal, squeak, or rumble  Do not attempt to inspect an accessory drive  is heard or felt while drive belt is in operation). belt with vehicle running.
  • Page 323 SERVICING AND MAINTENANCE Refrigerant Recovery And Recycling — The cabin air filter is located in the fresh air inlet WARNING! behind the glove compartment. Perform the R–1234yf following procedure to replace the filter: Use only refrigerants and compressor lubri-  R–1234yf Air Conditioning Refrigerant is a cants approved by the manufacturer for your 1.
  • Page 324 SERVICING AND MAINTENANCE 3. There are glove compartment travel stops on 5. Pry up the lid of each individual compartment 7. Remove the filter cover by prying back each of either side of the glove compartment door. To snap, and detach it from the rest of the snap. the retaining tabs from their hooking points, release them, push inward on each travel stop, There is a small space on the side of each...

  • Page 325: Body Lubrication

    SERVICING AND MAINTENANCE Operation of the wipers on dry glass for long Front Wiper Blade Removal/Installation UBRICATION periods may cause deterioration of the wiper Locks and all body pivot points, including such blades. Always use washer fluid when using the CAUTION! items as seat tracks, door hinge pivot points and wipers to remove salt or dirt from a dry windshield.
  • Page 326 SERVICING AND MAINTENANCE 2. To disengage the wiper blade from the wiper 3. With the wiper blade disengaged, remove the Installing The Front Wipers arm, flip up the release tab on the wiper blade wiper blade from the wiper arm by holding the 1.
  • Page 327 SERVICING AND MAINTENANCE Rear Wiper Blade Removal/Installation 4. Still holding the bottom end of the wiper blade, move the wiper blade upward and away from 1. Lift the rear wiper arm pivot cap away from the wiper arm to disengage. the glass to allow the rear wiper blade to be raised off of the glass.

  • Page 328: Exhaust System

    SERVICING AND MAINTENANCE Installing The Rear Wiper deteriorated, or mispositioned parts. Open seams CAUTION! or loose connections could permit exhaust fumes 1. Lift the rear wiper arm pivot cap away from to seep into the passenger compartment. In Damage to the catalytic converter can result if the glass to allow the rear wiper blade to be ...

  • Page 329: Cooling System

    SERVICING AND MAINTENANCE To minimize the possibility of catalytic converter Cooling System — Drain, Flush And Refill WARNING! damage: NOTE: When working near the radiator cooling fan,  Do not interrupt the ignition when the transmis-  Some vehicles require special tools to add coolant disconnect the fan motor lead or turn the igni- sion is in gear and the vehicle is in motion.
  • Page 330 SERVICING AND MAINTENANCE Do not use water alone or alcohol-based engine We recommend using Mopar® Antifreeze/ Mixing engine coolant types is not recom-    coolant products. Do not use additional rust Coolant 10 Year/150,000 Mile (240,000 km) mended and can result in cooling system inhibitors or anti-rust products, as they may not Formula OAT that meets the requirements of the damage.

  • Page 331: Brake System

    SERVICING AND MAINTENANCE Disposal Of Used Coolant Cooling System Notes Make sure that the coolant expansion bottle  overflow hoses are not kinked or obstructed. Used ethylene glycol-based coolant (antifreeze) is NOTE: Keep the front of the radiator clean. If your a regulated substance requiring proper disposal.

  • Page 332: Automatic Transmission

    SERVICING AND MAINTENANCE Brake Master Cylinder UTOMATIC RANSMISSION WARNING! The fluid in the master cylinder should be checked Special Additives To avoid contamination from foreign matter or  when performing under hood services or moisture, use only new brake fluid or fluid that The manufacturer strongly recommends against immediately if the “Brake Warning Light”...

  • Page 333: Fuses

    SERVICING AND MAINTENANCE Fluid Level Check Routine fluid and filter changes are not required. USES However, change the fluid and filter if the fluid The fluid level is preset at the factory and does not General Information becomes contaminated (with water, etc.), or if the require adjustment under normal operating transmission is disassembled for any reason.
  • Page 334 SERVICING AND MAINTENANCE Underhood Fuses NOTE: The fuses protect electrical systems against excessive current. The function and amperage of these fuses are The Power Distribution Center (PDC) is located in different, depending on vehicle trim level and When a device does not work, you must check the the engine compartment near the battery.
  • Page 335 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped – – Not Used – 25 Amp Clear Ignition Coil / Fuel Injector – – Not Used – 25 Amp Clear Amplifier / Active Noise Control * – –...
  • Page 336 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped Hands Free Dr Mod / Active Grille – 10 Amp Red Shutter / Pwr Mirror / VRM 40 Amp Green – Front HVAC Blower Motor 25 Amp Clear –...
  • Page 337 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped – 20 Amp Yellow Fuel Pump Motor 30 Amp Pink – CBC / Interior Lights 30 Amp Pink – Power Inverter * 30 Amp Pink – Driver Door Module 30 Amp Pink –...
  • Page 338 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped 30 Amp Pink – Trailer Tow Receptacle * – 20 Amp Yellow Rear Cargo Pwr Outlet – 20 Amp Yellow Trailer Tow Right Stop/Turn * – 20 Amp Yellow Power Transfer Unit * –...
  • Page 339 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped RR Entertainment / Media HUB / USB(S) / Rain Sensor / Sunroof / RR F77A – 10 Amp Red View Mirror/ Overhead DVD Player / INT Monitoring Camera / Wireless Charging Pad –...
  • Page 340 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped – 5 Amp Tan Security Gateway – – Not Used 40 Amp Green – ESC Motor Pump F95A – 10 Amp Red USB Charge Port — ACC RUN Selectable Fuse Location –...

  • Page 341: Bulb Replacement

    SERVICING AND MAINTENANCE EPLACEMENT Replacement Bulbs NOTE: Your vehicle is equipped with LED lamps. For replacement of LED lamps, see an authorized dealer. Interior Bulbs — Halogen Interior Bulbs Lamps Bulb Number Visor Vanity Lamps 6501966 NOTE: Your vehicle is equipped with LED lamps. For replacement of LED lamps, see an authorized dealer. Exterior Bulbs —...
  • Page 342 SERVICING AND MAINTENANCE Replacing Exterior Bulbs FRONT AND REAR SIDE MARKER LAMPS See below steps to replace: FRONT TURN SIGNAL LAMP 1. Remove the three fasteners from the inner See below steps to replace: wheel liner and carefully peel back liner for 1.

  • Page 343: Tires

    SERVICING AND MAINTENANCE TIRES LT (Light Truck) — Metric tire sizing is based on 1 — US DOT Safety Standards Code  US design standards. The size designation for (TIN) LT-Metric tires is the same as for P-Metric tires AFETY NFORMATION 2 —...
  • Page 344 SERVICING AND MAINTENANCE TIRE SIZING CHART EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on US design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on US design standards, or T or S = Temporary spare tire or 31 = Overall diameter in inches (in)
  • Page 345 SERVICING AND MAINTENANCE EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: XL = Extra load (or reinforced) tire, or  LL = Light load tire or ...
  • Page 346 SERVICING AND MAINTENANCE EXAMPLE: 01 = Number representing the year in which the tire was manufactured (two digits) 01 means the year 2001  Prior to July 2000, tire manufacturers were only required to have one number to represent the year in which the tire was manufactured. Example: 031 could ...
  • Page 347 SERVICING AND MAINTENANCE Tire Loading And Tire Pressure This placard tells you important information about the: NOTE: 1. Number of people that can be carried in the The proper cold tire inflation pressure is listed on vehicle. the driver’s side B-pillar or the rear edge of the driver's side door.
  • Page 348 SERVICING AND MAINTENANCE (4) The resulting figure equals the To determine the maximum loading conditions of Metric Example For Load Limit your vehicle, locate the statement “The combined available amount of cargo and luggage For example, if “XXX” amount equals 635 kg and weight of occupants and cargo should never load capacity.
  • Page 349 SERVICING AND MAINTENANCE...

  • Page 350: Tires - General Information

    SERVICING AND MAINTENANCE Fuel Economy WARNING! WARNING! Underinflated tires will increase tire rolling Overloading of your tires is dangerous. Overinflation reduces a tire's ability to cushion  resistance resulting in higher fuel consumption. Overloading can cause tire failure, affect vehicle shock.
  • Page 351 SERVICING AND MAINTENANCE Tire pressure may increase from 2 to 6 psi Radial Ply Tires CAUTION! (13 to 40 kPa) during operation. DO NOT reduce this normal pressure build-up or your tire pressure WARNING! After inspecting or adjusting the tire pressure, will be too low.
  • Page 352 SERVICING AND MAINTENANCE Run Flat Tires — If Equipped These indicators are molded into the bottom of the WARNING! tread grooves. They will appear as bands when the Run Flat tires allow you the capability to drive tread depth becomes a 1/16 of an inch (1.6 mm). Fast spinning tires can be dangerous.

  • Page 353: Tire Types

    SERVICING AND MAINTENANCE NOTE: It is recommended you contact an authorized tire CAUTION! Wheel valve stem must be replaced as well when dealer or original equipment dealer with any questions you may have on tire specifications or installing new tires due to wear and tear in existing Replacing original tires with tires of a different capability.

  • Page 354: Spare Tires - If Equipped

    SERVICING AND MAINTENANCE Spare Tire Matching Original Equipped Tire Summer tires do not contain the all season authorized tire dealer for recommended safe designation or mountain/snowflake symbol on the operating speeds, loading and cold tire inflation And Wheel — If Equipped tire sidewall.
  • Page 355 SERVICING AND MAINTENANCE Do not install a wheel cover or attempt to mount a Since this tire has limited tread life, the original Full Size Spare — If Equipped conventional tire on the compact spare wheel, equipment tire should be repaired (or replaced) The full size spare is for temporary emergency use since the wheel is designed specifically for the and reinstalled on your vehicle at the first...

  • Page 356: Wheel And Wheel Trim Care

    SERVICING AND MAINTENANCE Your wheels are susceptible to deterioration WARNING! CAUTION! caused by salt, sodium chloride, magnesium chloride, calcium chloride, etc., and other road Limited use spares are for emergency use only. Do not use scouring pads, steel wool, a bristle chemicals used to melt ice or control dust on dirt Installation of this limited use spare tire affects brush, metal polishes or oven cleaner.

  • Page 357: Snow Traction Devices

    SERVICING AND MAINTENANCE Dark Vapor Chrome, Black Satin Chrome, or Low Gloss Clear Coat Wheels CAUTION! If your vehicle is equipped with these specialty wheels, DO NOT USE wheel cleaners, abrasives, or polishing compounds. They will permanently damage this finish and such damage is not covered by the New Vehicle Limited Warranty. HAND WASH ONLY USING MILD SOAP AND WATER WITH A SOFT CLOTH. Used on a regular basis;...
  • Page 358 SERVICING AND MAINTENANCE Snow Traction Device (maximum Axle Tire/Wheel Size projection beyond tire profile or Trim Level equivalent) Touring Touring L 235/60R18 Touring L Plus Front 9 mm Cable/Chain Limited 235/60R18 Pinnacle 18 x 7.5 x 50.8 mm WARNING! Using tires of different size and type (M+S, Snow) between front and rear axles can cause unpredictable handling. You could lose control and have a collision. CAUTION! To avoid damage to your vehicle or tires, observe the following precautions: Because of restricted traction device clearance between tires and other suspension components, it is important that only traction devices in good condition...

  • Page 359: Tire Rotation Recommendations

    SERVICING AND MAINTENANCE CAUTION! Observe the traction device manufacturer’s instructions on the method of installation, operating speed, and conditions for use. Always use the suggested  operating speed of the device manufacturer’s if it is less than 30 mph (48 km/h). Do not use traction devices on a compact spare tire.

  • Page 360: Traction Grades

    SERVICING AND MAINTENANCE STORING THE VEHICLE Sustained high temperature can cause RACTION RADES the material of the tire to degenerate The Traction grades, from highest to If you are storing your vehicle for more than three and reduce tire life, and excessive lowest, are AA, A, B, and C.

  • Page 361: Body And Underbody Maintenance

    SERVICING AND MAINTENANCE The following maintenance recommendations will Do not use abrasive cleaning components, Special Care enable you to obtain maximum benefit from the solvents, steel wool or other aggressive material to If you drive on salted or dusty roads or if you ...

  • Page 362: Interiors

    SERVICING AND MAINTENANCE INTERIORS Sun damage can also weaken the fabric. Replace LASTIC OATED ARTS the belts if they appear frayed or worn or if the Use Mopar® Total Clean to clean vinyl upholstery. buckles do not work properly. EATS ABRIC ARTS CAUTION!

  • Page 363: Leather Surfaces

    SERVICING AND MAINTENANCE Clean with a wet soft cloth. A mild soap solution NOTE: LASS URFACES may be used, but do not use high alcohol content If equipped with light colored leather, it tends to All glass surfaces should be cleaned on a regular or abrasive cleaners.

  • Page 364: Vehicle Identification Number (Vin)

    TECHNICAL SPECIFICATIONS VEHICLE IDENTIFICATION NUMBER (VIN) BRAKE SYSTEM ORQUE PECIFICATIONS The VIN is on the left front corner of the instrument Your vehicle is equipped with dual hydraulic brake Lug Nut/Bolt **Lug Nut/ Lug Nut/Bolt panel and is visible from outside of the vehicle systems.

  • Page 365: Fuel Requirements

    TECHNICAL SPECIFICATIONS FUEL REQUIREMENTS 3.6L E Tighten the lug nuts/bolts in a star pattern until NGINE each nut/bolt has been tightened twice. Ensure Do not use E-85 flex fuel or ethanol blends greater While operating on gasoline with the required that the socket is fully engaged on the lug nut/bolt than 15% in this engine.

  • Page 366: Gasoline/Oxygenate Blends

    TECHNICAL SPECIFICATIONS E-85 I ASOLINE XYGENATE LENDS ETHYLCYCLOPENTADIENYL (MMT) I EHICLES ANGANESE RICARBONYL Some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol. ASOLINE Non-Flex Fuel Vehicles (FFV) are compatible with gasoline containing up to 15% ethanol (E-15). Use MMT is a manganese-containing metallic additive CAUTION! of gasoline with higher ethanol content may void...

  • Page 367: Materials Added To Fuel

    TECHNICAL SPECIFICATIONS ATERIALS DDED YSTEM AUTIONS CAUTION! Besides using unleaded gasoline with the proper The use of fuel additives, which are now being  CAUTION! octane rating, gasolines that contain detergents, sold as octane enhancers, is not recom- corrosion and stability additives are Follow these guidelines to maintain your mended.

  • Page 368: Fluid Capacities

    TECHNICAL SPECIFICATIONS FLUID CAPACITIES Metric Fuel (Approximate) 3.6L Engine 19 Gallons 71 Liters Engine Oil With Filter 3.6L Engine 5 Quarts 4.7 Liters Cooling System* 13.1 Quarts — Standard Duty Cooling 12.4 Liters — Standard Duty Cooling 3.6L Engine 13.4 Quarts — Heavy Duty Cooling 12.7 Liters —...

  • Page 369: Chassis Fluids And Lubricants

    TECHNICAL SPECIFICATIONS CAUTION! Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine damage and  may decrease corrosion protection. Organic Additive Technology (OAT) engine coolant is different and should not be mixed with Hybrid Organic Additive Tech- nology (HOAT) engine coolant (antifreeze) or any “globally compatible”...

  • Page 370: Customer Assistance

    CUSTOMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE IF YOU NEED ASSISTANCE Any communication to FCA US LLC’s customer center should include the following information: FOR YOUR VEHICLE FCA US LLC and its authorized dealers are vitally Owner's name and address  interested in your satisfaction.

  • Page 371: Mexico

    CUSTOMER ASSISTANCE Canadian residents with hearing difficulties that FCA US LLC is not responsible for any service EXICO contract you may have purchased from another require assistance can use the special needs relay Av. Prolongacion Paseo de la Reforma, 1240 service offered by Bell Canada.

  • Page 372: Warranty Information

    CUSTOMER ASSISTANCE WARRANTY INFORMATION REPORTING SAFETY DEFECTS To contact NHTSA, you may call the Vehicle Safety Hotline toll free at See the Warranty Information for the terms and 50 U NITED TATES 1-888-327-4236 (TTY: provisions of FCA US LLC warranties applicable to , D.C.

  • Page 373: Publication Order Forms

    CUSTOMER ASSISTANCE PUBLICATION ORDER FORMS To access your Owner's Information online, visit Le présent appareil est conforme aux CNR www.mopar.com/om d`Innovation, Science and Economic Development (US) or To order the following manuals, you may use either www.owners.mopar.ca applicables aux appareils radio exempts de (Canada).
  • Page 374 INDEX ........185 Air Cleaner, Engine Audio Systems (Radio) .........362 ......319 ........91 About Your Brakes (Engine Air Cleaner Filter) Auto Up Power Windows ......320 ......54 Adaptive Cruise Control (ACC) Air Conditioner Maintenance Automatic Dimming Mirror ........144 ....320 ........63 (Cruise Control) Air Conditioner Refrigerant...
  • Page 375 Battery Saver Feature ........64 Cargo Clean Air Gasoline ......... 363 Belts, Seat .............283 Vehicle Loading ...........97 Cleaning Blind Spot Monitoring ........233 Cargo Area Cover ..........97 Wheels ............354 Body Mechanism Lubrication ......323 Cargo Compartment Climate Control ..........67 B-Pillar Location ..........345 Luggage Carrier ........
  • Page 376 ........239 ............364 Emergency Braking Ethanol ....65 ........285 Daytime Brightness, Interior Lights Emergency, In Case Of Exhaust Gas Cautions ........61 ......286 ........285 Daytime Running Lights Hazard Warning Flasher Exhaust System ..........318 ..........290 ........61 Dealer Service Jacking Exterior Lighting...
  • Page 377 Front Position Light ........340 Fuel ...............363 Hazard Ignition .............16 Additives ...........365 Driving Through Flowing, Rising, Switch ............16 Clean Air ............363 Or Shallow Standing Water ....183 Indicator Lights Ethanol ............364 Hazard Warning Flashers ......286 Blue ............127 Filler Cap (Gas Cap) ........172 Head Restraints ..........50...
  • Page 378 ............94 ..........126 Liftgate KeySense ..........290 ............95 ......124 Jack Location Power LaneSense ..........290 ........... 284 ..........122 Jack Operation Light Bulbs Liftgate Open ..........303 ......61 Jump Starting Lighter Lights On Reminder ............89 ........... 123 Cigar Low Fuel ............284 ........124 Lights Low Washer Fluid ............
  • Page 379 Load Shed Electrical Load Reduction ....118 Heated ..........54 Identification Logo ........318 Load Shed Intelligent Battery Sensor ....118 Memory ............30 Materials Added To ........319 Loading Vehicle ........97 Outside ..........54 Pressure Warning Light ......122 Tires ............345 Rearview ..........54 Recommendation ......
  • Page 380 Power Seats Remote Control Adjustable Upper Shoulder Belt ............46 ...........18 ..........247 Down Starting System Anchorage ............45 ... 251 Forward Remote Keyless Entry Automatic Locking Retractor (ALR) ............. 45 ..........20 ........266 Rearward Arm The Alarm Child Restraints ..............
  • Page 381 Stow ‘n Go (Fold in Floor) ......40 Button ............16 Tire Markings ..........341 Tilting ........... 31 Cold Weather ..........132 Tire Safety Information ........341 Security Alarm ..........123 Engine Fails To Start ......... 132 Tire Service Kit ..........297 Arm The System ..........
  • Page 382 ..........93 To Open Hood .......179 Tongue Weight/Trailer Weight Uconnect Warning Lights ............174 ............. 207 ............120 Towing Theater ........309 ............123 Disabled Vehicle Uconnect 4C/4C Nav With 8.4-Inch Yellow ............177 ............186 ...... 120 Guide Display Warning Lights And Messages ..........182 ........
  • Page 383 This Owner’s Manual has been prepared to help you get acquainted with your new Chrysler brand vehicle and to provide a convenient reference source for common questions. Not all features shown in this manual may apply to your vehicle. For additional information, visit mopar.com/om (U.S.), owners.mopar.ca (Canada) or your local Chrysler brand dealer.
  • Page 384 ©2021 FCA US LLC. All Rights Reserved. Tous droits réservés. Chrysler is a registered trademark of FCA US LLC or FCA Canada Inc., used under license. Chrysler est une marque Fourth Edition déposée de FCA US LLC ou FCA Canada Inc., utilisée sous le permis. App Store is a registered trademark of Apple Inc. Google Play Store is a registered trademark of Google.

Table of Contents