Fuel And Oil Refresh Mode - Chrysler Pacifica Hybrid 2020 Owner's Manual

duty cycle based, which means the engine
oil change interval may fluctuate, depen-
dent upon your personal driving style.
Unless reset, this message will continue to

display each time the ignition is cycled to
the ON/RUN position.
To reset the oil change indicator, refer to

the following procedure.
NOTE:
This procedure should only be performed
after scheduled maintenance is completed.
Resetting oil life other than when associated
with a scheduled maintenance may result in
damage due to not properly maintaining the
engine oil.
1. Without pressing the brake pedal, push
the ENGINE START/STOP button and
place the ignition in the ON/RUN position
(do not start the vehicle.)
2. Push the OK button to enter the instru-
ment cluster display menu screen.
3. Push and release the down arrow button
to access the "Vehicle Info" menu
screen.
4. Push the left arrow button or right arrow
button to access the "Oil Life" submenu.
5. Hold the OK button to reset the "Oil Life"
to 100%.
6. Push the up arrow button to exit the
instrument cluster display menu screen.
Secondary Method For Oil Life Reset Procedure
1. Without pushing the brake pedal, place
the ignition in the ON/RUN position (do
not start the engine).
2. Fully press the accelerator pedal, slowly,
three times within 10 seconds.
3. Without pushing the brake pedal, place
the ignition in the OFF/LOCK position.
NOTE:
If the indicator message illuminates when
you start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this
procedure.

Fuel And Oil Refresh Mode

Since it is possible to operate this vehicle for
extended periods of time without running the
gas engine, the fuel within the vehicle's fuel
tank can become stale or the engine oil's
lubricating properties can be reduced. To
prevent engine and/or fuel system damage
due to stale fuel, as well as, maintaining
internal engine lubrication, this vehicle is
equipped with a "Fuel and Oil Refresh
Mode".
The vehicle will automatically enter into the
Fuel and Oil Refresh Mode to minimize
potential for stale fuel, and to ensure lubrica-
tion of internal engine components. When
operating in this mode, the gas engine will
run to provide vehicle propulsion (electric
only operation is inhibited). A message will
be displayed in the instrument cluster when-
ever Fuel and Oil Refresh Mode is active.
The vehicle will automatically exit the Fuel
and Oil Refresh Mode when conditions have
been satisfied. If the vehicle enters Fuel and
Oil Refresh Mode, due to fuel which has been
in the fuel tank for a long period of time
(becoming stale fuel), the engine will run
whenever the vehicle is operational (no elec-
tric only operation) until the low fuel level
warning is activated. It is also possible to exit
the Fuel and Oil Refresh Mode sooner by
adding a minimum of four gallons of new fuel
to the vehicle's fuel tank.
31