Oil Life Reset; Keysense Cluster Messages - If Equipped - Chrysler PACIFICA HYBRID 2019 User Manual

Hide thumbs Also See for PACIFICA HYBRID 2019:
Table of Contents

Advertisement

• Right Arrow Button
Push and release the right arrow button to access
the information screens or submenu screens of a
main menu item.
• Back/Left Arrow Button
Push and release the left arrow button to access
the information screens or submenu screens of a
main menu item.
• OK Button
Push the OK button to access/select the informa-
tion screens or submenu screens of a Main Menu
item. Push and hold the OK arrow button for one
second to reset displayed/selected features that
can be reset.

Oil Life Reset

• Your vehicle is equipped with an engine oil change
indicator system. The "Oil Change Due" message
will display for approximately five seconds after a
single chime has sounded, to indicate the next
scheduled oil change interval. The engine oil
change indicator system is duty cycle based, which
means the engine oil change interval may fluctu-
ate, dependent upon your personal driving style.
• Unless reset, this message will continue to display
each time the ignition is cycled to the ON/RUN
position.
• To reset the oil change indicator, refer to the fol-
lowing procedure:
Without pressing the brake pedal, push the EN-
GINE START/STOP button and place the ignition
in the ON/RUN position (do not start the vehicle.)
NOTE:
This procedure should only be performed after
scheduled maintenance is completed. Resetting oil
life other than when associated with a scheduled
maintenance may result in severe engine damage.
1. Push the OK button to enter the instrument
cluster display menu screen.
2. Push and release the down arrow button to ac-
cess the "Oil Life" menu screen.
3. Push the left arrow button or right arrow button
to access the "Vehicle Info" submenu.
4. Hold the OK button to reset the "Oil Life" to
100%.
5. Push the up arrow button to exit the instrument
cluster display menu screen.
Secondary Method For Oil Life Reset Procedure
1. Without pushing the brake pedal, place the igni-
tion in the ON/RUN position (do not start the
engine).
2. Fully press the accelerator pedal, slowly, three
times within ten seconds.
3. Without pushing the brake pedal, place the igni-
tion in the OFF/LOCK position.
NOTE:
If the indicator message illuminates when you start
the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
KeySense Cluster Messages —
If Equipped
When the KeySense key is in use there will be:
• Continuous, dedicated telltale
• Unique Display Splash Screen
75

Advertisement

Table of Contents
loading

Table of Contents