Table of Contents
Advertisement
Network Parameters
•
Under Basic Settings, click the Network link. The Network Parameters page opens.
•
Configure the following Network Parameters by clicking their respective links.
Connection Type
•
Click Connection Type.
•
As network connection type, select the IP Addressing Scheme used by your network to assign the WAN IP
address to the Ethernet Port: Static, DHCP, PPPoE. Default: Static.
•
Static: If your network uses Static IP addressing, select Static and configure the following parameters.
•
IP Address: Enter the IP Address you obtained from your Network Administrator for the Ethernet
Port of SETU VFXTH in this field. Make sure the IP Address does not conflict with that of any other
device on the LAN. Default: 192.168.1.100
•
Subnet Mask: Enter the Subnet Mask you obtained from your Network Administrator for the
Ethernet Port in this field. Default: 255.255.255.0
Matrix SETU VFXTH System Manual
30
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SETU VFXTH and is the answer not in the manual?