Green Led/ Power Led Connector (Gled/Pled); Power Led Connector (Pled) - Shuttle Spacewalker MK20 User Manual

Green LED / Power LED Connector (GLED/PLED)
C3
This header is dual color LED function.
Dual color LED function is defined by either Power LED or Green LED, the
header can be in these states.
The Green LED indicates that the system is currently in one of the power saving
mode (Doze/Standby/Suspend). When the system resumes to normal opera-
tion mode, the Green LED will go off, power LED on.
This Power LED will go off during power saving mode.
Attach a 2-pin Green LED/Power LED cable to GLED/PLED header.
2
4
C4

Power LED Connector (PLED)

Attach the 3-pin Power-LED connector cable from the housing front-panel to
the PLED header on the mainboard. The power LED stays light while the sys-
tem is on.
2
4
- 34 -
1
1