Power Led / Green Led Connector (Pled/Gled); Hardware Reset Connector (Rst) - Shuttle FT61 Manual

Power LED / Green LED Connector (PLED/GLED)

C3
This header is dual color LED function. Dual color LED function is defined by
either Power LED or Green LED, the header can be in these states.
The Green LED indicates that the system is currently in one of the power saving
mode (Doze/Standby/Suspend). When the system resumes to normal opera-
tion mode, the Green LED will go off, power LED on.
This Power LED will go off during power saving mode.
Attach a 2-pin Power LED/Green LED cable to (PLED/GLED) header.

Hardware Reset Connector (RST)

C4
Attach the 2-pin hardware reset switch cable to the (RST) header. Pressing the
reset switch causes the system to restart.
Front Panel
1
J8
Front Panel
1
- 32 -
J8