Software Feature Jumpers; Peripheral Connectors - Motorola 56F805 Hardware User Manual

2.21 Software Feature Jumpers

The 56F805EVM board contains two software feature jumpers that allow the user to select
"User Defined" software features. Two GPIO port pins, PD0 and PD1, are pulled high
with 10k ohm resistors on JG1 and JG2. Attaching a jumper will ground the respective
Port D signal line; see

2.22 Peripheral Connectors

The EVM board contains a group of Peripheral Expansion Connectors used to gain access
to the resources of the 56F805. The following signal groups have Expansion Connectors:
• Port B
• Port D
• Port E
• External Memory Control
• Encoder A/Timer Channel A
• Encoder B/Timer Channel B
• Timer Channel C
• Timer Channel D
• Port A/Address Bus
• Data Bus
• A/D Input Port
• Serial Communications Port 0
MOTOROLA
Freescale Semiconductor, Inc.
Figure 2-18.
56F805
+3.3V
PD0
+3.3V
PD1
Figure 2-18. Software Feature Jumpers
Technical Summary
For More Information On This Product,
Go to: www.freescale.com
Peripheral Connectors
JG1
1
2
3
JG2
1
2
3
2-23