Mechanical Installation - Bartec POLARIS B7-72V1 Series User Manual

Commissioning
6.2

Mechanical Installation

EN 22/65
POLARIS PROFESSIONAL- for Zone 2/22
POLARIS Panel PC Professional 10,4" / 12,1" / 12,1" W
Choose the optimum height for operating the POLARIS.
–
Ensure good lighting conditions for a perfectly legible display
–
(no direct exposure to the sun's rays).
Do not mount in direct proximity to switching or current changing devices.
–
Only install the POLARIS in conjunction with the reinforcement frame in an IP65
–
enclosure. Failure to comply with this can lead to water penetrating and damaging
the device.
Outdoor Installation
ATTENTION
Damage from condensation or overheating!
Avoid direct sunlight!
Remedy: e.g. shelter with sufficient air circulation.
Remove condensation on the POLARIS immediately.
A POLARIS built into an enclosure must be heated and not removed
from the mains.
Equip the protective housing with breather.
COUTION
This device is heavy (10-21 kg).
There is a risk of injury if it is lifted or moved incorrectly.
You will need help from others when transporting it.
Only qualified personnel, i.e. trained skilled specialists will have the necessary
specialised know-how to be able to perform all the mechanical work. Familiarity with and
the technically perfect implementation of the safety instructions described in this manual
are preconditions for safe installation and commissioning.
Technical data subject to change.
09/2020