Table of Contents
Advertisement
Basic
safety instructions
1.7
Labelling, test certificate and standards
1.8
Warranty
EN 4/65
POLARIS
PROFESSIONAL- for Zone 2/22
POLARIS Panel PC Professional 10,4" / 12,1" / 12,1" W
No constant servicing will be necessary if operated correctly under consideration of the
assembly instructions and environmental conditions. See Chapter "Service, inspection,
repair" in this respect.
Gemäß EN/IEC 60079-17 und EN/IEC 60079-19 ist der Betreiber elektrischer Anlagen in
explosionsgefährdeten Bereichen verpflichtet, diese durch eine Elektrofachkraft auf ihren
ordnungsgemäßen Zustand prüfen zu lassen.
Repairs to explosion-proof equipment may only be performed by persons authorized by
BARTEC, who must employ the latest technological practices, observe the manufacturer's
instructions and use only original spare parts. The applicable regulations are to be observed
here.
It must be checked that all components and documents are available before commissioning.
The device features an explosion protection label, as well as a test certificate. For an
explanation of the symbols and information used, see chapter 4 "Technical data".
The POLARIS PROFESSIONAL Panel PC series complies with Directive 2014/34/EU on
equipment and protective systems intended for use in potentially explosive atmospheres
(ATEX Directive). For information on standards that must be observed, see chapter 3
"Explosion protection and approvals".
WARNING
Explosion protection cannot be guaranteed if non-specified components are used.
Do not make any changes or perform any reconstruction work on the device.
Use only original spare parts
The manufacturer provides a full warranty exclusively for the spare parts it supplies.
When using parts from third parties, there is no guarantee that they have been designed
or manufactured to handle the requisite stress or offer the requisite degree of safety.
1.6.2
Servicing
1.6.3
Inspection
1.6.4
Repairs
1.6.5
Commissioning
Technical data subject to change.
09/2020
Advertisement
Table of Contents
