Floor Mounting - Bartec POLARIS B7-72V1 Series User Manual

POLARIS BASIC - for Zone 1 / 21
POLARIS Panel PCs 5.7" / 10.4" / 12.1"
Technical data subject to change.
09/2020
Stainless steel enclosure "Standard" for floor and wall mounting
Type
POLARIS 10.4" / 12.1" W
POLARIS 12.1"
Work steps
(1) Prepare supply and data line(s).
(2) Prepare installation on the basis of the drilling template (see illustration 9 - 10).
(3) Install supply and data line(s) in the base.
(4) Fasten the supporting system.
(5) Pull supply and data line(s) through the cable glands provided into the enclosure.
Ensure there is sufficient length.
(6) Mount the enclosure on the supporting system.
(7) Open the terminal compartments on the POLARIS and feed the supply and data
line(s) through the cable glands and wire them. Block unused terminal compartments
with a blanking plug.
(8) Close the door of the enclosure.
Illustration 8: Drilling pattern - supporting system for floor mounting
Dimensions (Width x Height x Depth)
560 mm x 320 mm x 200 mm
600 mm x 350 mm x 200 mm
6.2.3 Floor mounting (Stainless steel enclosure :
Commissioning
EN 25/65