Restoration In The Work State - Bartec POLARIS B7-72V1 Series User Manual

Operation
EN 50/65
POLARIS PROFESSIONAL- for Zone 2/22
POLARIS Panel PC Professional 10,4" / 12,1" / 12,1" W
To accept the licence terms, the option "I accept the terms in the End User License
Agreement" must be activated or be selected. The button "Start Recovery" is released
enclosed. With confirming the Recovery process is begun.
All other pictures in the instructions refer to Recovery of Windows 10 IoT Enterprise of
operating system. In case of the restoration of Windows 7 Embedded Ultimate or
standard of operating system the pictures look similar. Besides, all background expiries
are identical, with the differences it is only about inscriptions.
The operation (navigating over window, selecting and activation of tax elements etc. )
takes place via keyboard input and mouse or Track ball-Clicks as well as by Touch.
In the next window all available Recovery functions are listed. In the upper area of the
window there is information about the operating system which is played in by the Recovery
programme. In the middle area there are the Recovery functions. Should all conditions be
given, the function is active. Otherwise the function remains inactive.
Illustration 6: Choice of functions
If the Recovery is started by an external medium, there is beside the function to move
the device into the work state also other functions for backup or restoration from the
available backup. It enables therefore to provide an effigy of a running and preconfigured
operating system if necessary also and to play in back in the case of a mistake.
With confirming the function with all matching background processes is begun immediately
or without following security queries.
8.3.5

Restoration in the work state

Technical data subject to change.
09/2020