Conventions - Siemens SIPROCESS GA700 Quick Start Manual

1.5

Conventions

Overview
To allow easier navigation within this documentation, the tables below provide information on
the use of markups and terminology.
Table 1- 2
Representation
type
"Add screen"
"File > Edit"
<F1>, <Alt+P>
[1] to [6]
[1. ...] to [6]
→
Table 1- 3
Term
Local user inter-
face
Auto hotspot
"See also"
Quick Start
Compact Operating Instructions, 06/2017, A5E31805656-05
Conventions on markups
Scope
Terminology that appears in the user interface, for example, dialog names,
•
tabs, buttons, menu commands
Required inputs, for example, limits, tag values.
•
Path information
•
Operational sequences, for example, menu commands, shortcut menu com-
mands.
Keyboard operation
Numbers of the main menu in the LUI, part of the
menu name
Numbering of the menus downstream from the
main menu, part of the menu name
Introduces a text-dependent reference to a section or a paragraph in this docu-
mentation. The page numbers are always specified in parentheses for refer-
ences in the document. Example of a reference (hyperlink):
→ References (Page 108)
Conventions on terminology
Convention/alternative name
"LUI" for short.
Defective reference
At the end of the paragraph/page: Text-independent reference
Introduction
1.5 Conventions
The square brackets identi-
fy the chapter numbers that
precede the menu names.
9