Connection Of The Signal Lines - Siemens SIPROCESS GA700 Quick Start Manual
Continuous gas analysis
Hide thumbs
Also See for SIPROCESS GA700:
- Operating manual (306 pages) ,
- Compact operating instructions (244 pages) ,
- Operating instructions manual (224 pages)
Table of Contents
Advertisement
Connecting
5.1 Electrical connections
5.1.3.2
Connection of the signal lines
A
①
②
③
④
⑤
⑥
⑦
Figure 5-2
You can find additional information on the setting of optional modules or MODBUS TCP
using the list of references in the following documentation:
→ Table A-1 References 1 - Operating Manuals LUI (Page 108)
→ Table A-2 References 2 - Operating Manuals PDM (Page 108)
See also
References (Page 108)
42
Detail view of option module connections
OM1.1 and OM2.1/2.2 with embossed connector numbers on the enclosure's rear panel
Power supply
Processing module, Ethernet (MODBUS TCP), and 37-pin sub-D (female), digital inputs and
outputs
Optional module 1.1 25-pin sub-D (female), digital inputs and outputs
Optional module 2.1, 15-pin sub-D (male), digital outputs and analog outputs or
Optional module 2.2, 15-pin sub-D (female), digital inputs, analog inputs and analog outputs
Mounting location analyzer module 2
Mounting location analyzer module 1
Example of rear panel with OXYMAT 7, connecting the signal lines
Compact Operating Instructions, 06/2017, A5E31805656-05
Quick Start
Advertisement
Table of Contents
