Introduction; Purpose Of This Document; History - Siemens SIPROCESS GA700 Quick Start Manual

Introduction

1.1

Purpose of this document

These compact operating instructions are intended for persons who install the device
mechanically and electrically, connect it up and commission it.
These instructions contain all information required to commission the device. Read the
instructions completely before starting the commissioning of the device.
You can find a complete description in the documentation on the accompanying CD
(Operating instructions, Operating manuals): → References (Page 108).
1.2

History

The following table includes information on the different editions of this document.
Table 1- 1
Edition
01/2013
05/2014
05/2015
03/2016
06/2017
Quick Start
Compact Operating Instructions, 06/2017, A5E31805656-05
History
Comment
First edition
Expansion option modules OM 1.1 and OM 2.2 (analog inputs, digital inputs, digital out-
puts), corrections
Extension for analyzer modules CALOMAT 7 and ULTRAMAT 7
Additional module combinations for CALOMAT 7 and ULTRAMAT 7.
Extended ULTRAMAT 7 area of application: measurement of components NO, N
SO , CH , C H , NH
2 4 2 4 3
ULTRAMAT 7: Measurement of two components simultaneously.
Corrosion resistant versions of ULTRAMAT 7 and OXYMAT 7
Cleaned for O : Variants with specially cleaned gas path for sample gases with high
2
oxygen content
1
O,
2
7