Appendix D - Selecting the Outlet Valve, Mounting the
Stack to the Press
Recommended for the customer to connect an auto-
matic shutoff valve between the screw on the press and
the LSR Select mixer. The LSR select has a solenoid
valve and controls to connect a double acting valve.
ti18105a
Outlet valve controls on HMI
The mixer outlet is 3/4"NPT male. When the valve stack
is attached to the screw, care should be taken to ensure
the valve stack is mounted rigidly. External brackets
may be required.
3A2152B
Appendix D - Selecting the Outlet Valve, Mounting the Stack to the Press
1/4" Air Supply
for Outlet Valve
107