AXIOMTEK UST210-83K-FL Series User Manual page 43

BIOS menu item
Ignition
Management
Auto Power On
Advance
Setting
Save Settings
Restore
Factory
Settings
AMI UEFI BIOS Utility
Description
Enabled
Switch to In-Vehicle mode
Disabled
Switch to AT/Railway mode
*PSU and system will reset after setting is saved
Enabled
System will turn on automatically under below
conditions
- Manually disconnects and reconnects system
power
- Power interruption: Resumes power after
power fail
Disabled
System will not turn on automatically when
power is connected or when power resumes
from a power failure
Set system on/off timing and voltage threshold levels
Save the current settings to PSU
Restores factory defaults to remove any incorrect or corrupt settings
that might have prevented the system from properly powering on/off.
UST210-83K-FL User's Manual
35