Service Mode For Port: # Menu; Hamband Mask For Port: # Menu; Table 5-100. Service Mode For Port: # Menu Options; Table 5-101. Hamband Mask For Port: # Menu Options - ADTRAN NetVanta 1224 Installation And Maintenance Practice

Service Mode for Port: # Menu

Service Mode for Port: #
Main Menu\DSL Menus\DSL Provisioning\Port
The Service Mode option on the
menu. The # represents the value displayed for the Select Port option. The service mode refers
to the data mode for the traffic between the DSLAM and the modem.
The Service Mode for Port: # menu options are shown in

Table 5-100. Service Mode for Port: # Menu Options

Option Description
1 Multimode
2 T1.413
3 G.dmt
4 G.lite
5 ADSL2
6 ADSL2.lite
7 ADSL2+
8 READSL
9 Legacy Multimode (ADSL1)
If a mode is specified, it must be one supported by the customer's modem.

Hamband Mask for Port: # Menu

Hamband Mask for Port: #
Main Menu\DSL Menus\DSL Provisioning\Port
The Hamband Mask option on the
Port: # menu. The # represents the value displayed for the Select Port option. Hamband Mask
is for masking out frequencies that are used by hamband (ham radios) so that those
frequencies and their respective tones do not interrupt the training process.
The Hamband Mask for Port: # menu options are shown in

Table 5-101. Hamband Mask for Port: # Menu Options

Option Description
1 Enabled
2 Disabled
61179621L1-5C
Provisioning\Service Mode for Port: #\
Port Provisioning Menu
Function
Multimode allows the DSLAM and the modem to pick a
mode for the line to use to train up.
This option sets T1.413 as the Service Mode.
This option sets G.dmt as the Service Mode.
This option sets G.lite as the Service Mode. If the mode
is set to G.lite, the Line Type should be set to Interleave
from the "ADSL Profiles Menu"
ports. Even if the Line Type remains set to Fast, the
modem can only train up as Interleave.
This option sets ADSL2 as the Service Mode.
This option sets ADSL2.lite as the Service Mode.
This option sets ADSL2+ as the Service Mode.
This option sets READSL as the Service Mode.
This option sets Legacy Multimode as the Service Mode.
Provisioning\Hamband Mask for Port: #\
Port Provisioning Menu
Function
This option enables hamband masking.
This option disables hamband masking.
displays the Service Mode for Port: #
Table 5-100.
on page 5-131 for these
displays the Hamband Mask for
Table 5-101.
Menu Descriptions
5-141