Total Access 1224 Quad T1 IMA 24-Port DSLAM Installation and Maintenance Practice
Dynamic IP Settings - for IP over ATM Menu
Dynamic IP Settings - for IP over ATM
Main Menu\System Management\Mode Selection and Current IP
The Dynamic IP Settings - for IP over ATM menu (see
the IP settings. When the Mode option is set to Dynamic, the Total Access 1224 system
automatically retrieves the IP address, Subnet mask, and Default Gateway from the remote
DHCP server. The remaining menu items can be provisioned manually.
TID: HSVL00001
Unacknowledged Alarms: None
Figure 5-35. Dynamic IP Settings - for IP over ATM Menu
The Dynamic IP Settings - for IP over ATM menu items are shown in
5-54
Settings\Dynamic IP Settings - for IP over ATM\
Figure
Total Access 1224
Dynamic IP Settings - for IP over ATM
IP address
Subnet mask
3. VPI/VCI
4. PCR
Default Gateway
6. TFTP IP address
7. TL1 Port Number(set >1023) 13001
8. TL1 IP Transport type
9. Reset IP Factory Defaults
MAC Address
Encapsulation is via rfc1483 SNAP
Selection :
'?' - System Help Screen
5-35) is used to provision some of
0.0.0.0
0.0.0.0
0/32
3000
Not Configured
Not Configured
TCP
00-a0-c8-12-6d-f9
Table
5-34.
61179621L1-5C