ADTRAN NetVanta 1224 Installation And Maintenance Practice page 44

Total Access 1224 Quad T1 IMA 24-Port DSLAM Installation and Maintenance Practice
10. From the T1 Provisioning menu, configure the
setting to match the settings of the T1DS1s provided. Press
to configure and continue this process until all the T1/DS1s are properly configured.
11. From the T1 Provisioning menu, press
12. From the T1 Main Menu, select T1 Status, and press
13. From the T1 Status menu, confirm that the T1/DS1s do not have active alarms.
If the T1/DS1s have active alarms, this is an indication of a net-
work feed issue.
14. From the T1 Status menu, press
15. From the Network Port menu, select
16. From the IMA Main Menu, select
17. From the IMA Provisioning menu, select
18. From the IMA Facility Provisioning for # 1 menu, select
.
E
NTER
19. From the Operation Mode for Facility for # 1 menu, provision the facilities as appropriate.
For more information, refer to
The default settings assign the four facilities to the IMA Group.
20. From the Operation Mode for Facility for # 1 menu, press
menu displays.
21. From the IMA Provisioning menu, select
22. From the IMA Group Provisioning menu, select
23. From the Group Operation Mode menu, select
24. Press until the Main Menu displays.
E
SC
25. From the Main Menu, select
26. From the System Management menu, select
27. From the Mode Selection and Current IP Settings menu, verify that the Mode is set to
.
Static
28. From the Mode Selection and Current IP Settings menu, select
E .
NTER
29. From the Status IP Settings - for IP over ATM menu, configure the following fields:
• IP Address
• Subnet Mask
• VPI/VCI
• Default Gateway
3-20
Type
to return to the T1 Main Menu.
E
SC
NOTE
until the Network Port menu displays.
E
SC
and press
IMA
, and press
Provisioning
IMA Facility
"Operation Mode for Facility Menu"
IMA Group
Group Operation Mode
In Service
, and press
System Management
IP Address
, , , and
Framing Line Code
to access the next T1/DS1
N
.
E
NTER
.
E
NTER
.
E
NTER
, and press .
E
NTER
Facility Operation Mode
on page 5-110.
until the IMA Provisioning
E
SC
, and press .
E
NTER
, and press
, and press
E
NTER
.
E
NTER
, and press
E
NTER
Configure IP
Line Build Out
, and press
.
E
NTER
.
.
, and press
61179621L1-5C