Maintenance; Introduction; Snmp/Tftp And Tl1 Configuration Storage And Retrieval; Snmp / Tftp - ADTRAN NetVanta 1224 Installation And Maintenance Practice

INTRODUCTION

The Total Access 1224 does not require routine maintenance for normal operation.
ADTRAN does not recommend that repairs be attempted in the field. Repair services can be
obtained by returning the defective unit to ADTRAN. For more troubleshooting information,
refer to the Total Access 1100/1200 Series Troubleshooting Guide (P/N 61179741L1-44). For
warranty information, refer to

SNMP/TFTP AND TL1 CONFIGURATION STORAGE AND RETRIEVAL

Use the following SNMP/TFTP and TL1 commands to store or retrieve the Total Access 1224
System Configuration Archive (SCA) file.
In some installations, the configuration file can be stored and
retrieved in one operation for multiple Total Access 1224 systems.
This is accomplished by incorporating the SNMP/TFTP or TL1 com-
mands into scripts.

SNMP / TFTP

These objects are located in the ADTRAN-TA1200Shelf-MIB.mib, under adTA1200ShelfProv.

Save

Set TFTP Server IP address with adTA1200SCATftpServerHostName
Set filename using adTA1200SCAFileName
Initiate transfer using adTA1200SCAInitiateSave (option initiate (1))

Restore

Set TFTP Server IP address with adTA1200SCATftpServerHostName
Set filename using adTA1200SCAFileName
Initiate transfer using adTA1200SCAInitiateRestore (option initiate (1))
61179621L1-5C
Section 6

Maintenance

"Appendix A, Warranty".
NOTE
6-1