Total Access 1224 Quad T1 IMA 24-Port DSLAM Installation and Maintenance Practice
Restore ATM Factory Defaults Menu
Restore ATM Factory Defaults
Main Menu\ATM Circuit
Management\Restore ATM Factory Defaults\
The Total Access 1224 provisioning system provides the ability to restore the ATM parameters
to the factory defaults.
TID: HSVL00001
Unacknowledged Alarms: None
Figure 5-21. Restore ATM Factory Defaults Menu
This action is service affecting. All traffic descriptors and PVCs are
removed.
The Restore ATM Factory Defaults menu options are shown in
Table 5-19. Restore ATM Factory Defaults Menu Options
Option
Description
1
Delete All PVCs and Restore
Default Settings
2
Delete Host PVCs
3
Delete Client 1 PVCs
4
Delete Client 2 PVCs
5
Delete Client 3 PVCs
5-34
Figure 5-21
displays the Restore ATM Factory Defaults menu.
Restore ATM Factory Defaults
WARNING! THIS IS SERVICE AFFECTING!
This is for defaulting the ATM parameters only. This
will delete all of the selected PVCs and reset the
traffic descriptors to their default values.
1. Delete All PVCs and Restore Default Settings
2. Delete Host PVCs
3. Delete Client 1 PVCs
4. Delete Client 2 PVCs
5. Delete Client 3 PVCs
Selection :
'?' - System Help Screen
CAUTION
Function
This option deletes all PVCs and restores ATM factory
defaults without additional prompting.
This option deletes Host PVCs without additional
prompting.
This option deletes Client 1 PVCs without additional
prompting, if enabled.
This option deletes Client 2 PVCs without additional
prompting, if enabled.
This option deletes Client 3 PVCs without additional
prompting, if enabled.
Total Access 1224
Table
MM/DD/YY
HH:MM
5-19.
61179621L1-5C