Create A New Pvc/Pvp Screen; Table 5-7. Create A New Pvc/Pvp Screen Fields - ADTRAN NetVanta 1224 Installation And Maintenance Practice

Create a New PVC/PVP Screen

Create New PVC/PVP
Main Menu\ATM Circuit Management\PVC/PVP
The Create a New PVC/PVP screen (see
connections. Each ADSL connection has at least one PVC/PVP per ATM circuit provisioned for
data flow. PVC/PVPs map ATM circuits from the network to the ADSL ports.
NOTE: No changes will take effect until an action is selected and executed.
To Select an action, place the cursor over the Action option and press the
Enter a VPI value between 0 an 4095.
The Create a New PVC/PVP screen fields are shown in
Field
Endpoint 1 Port
Endpoint 1 VPI
Endpoint 1 VCI
Endpoint 2 Port
Endpoint 2 VPI
Endpoint 2 VCI
61179621L1-5C
Management\Create New PVC/PVP\
Figure
Create a New PVC/PVP
Endpoint 1 (Net --> Cust)
Port VPI VCI
Netw 35 1000
____________________________________________________________
Service Pkt Discard
UBR Enabled
Circuit ID
N/A
____________________________________________________________
When finished, place cursor here to select action:
Create new circuit and return to PVC/PVP Management
Space Bar. To execute the action, press Enter.
Figure 5-12. Create a New PVC/PVP Screen

Table 5-7. Create a New PVC/PVP Screen Fields

Description
This field displays the network port.
This field displays the Virtual Path Identifier for the ATM port
from the Network. Valid values range from 0 to 4095.
This field displays the Virtual Channel Identifier for the ATM
port from the network. Valid values range from 0 to 65535.
This field displays the ATM port that is being created. Valid
values range from 1 to 24.
This field displays the Virtual Path Identifier for the ATM port.
Valid values range from 0 to 4095.
This field displays the Virtual Channel Identifier for the ATM.
Valid values range from 0 to 65535.
5-12) is used to create the PVC/PVPs for ADSL
Endpoint 2 (Net <-- Cust)
Port VPI VCI
1 0 35
PCR
Best Effort
Table 5-7.
Menu Descriptions
5-19