Replacement Criteria For Motor Brakes - R&M LOADMATE LM16 Installation And Maintenance Manual

LM16-20-25 I&M MANUAL/EN/11.30.2010
6.2.1

Replacement Criteria for Motor Brakes

Table 2. Replacement Criteria for Motor Brakes
LM 01 0.260 inches (6.6 mm)
LM 05 0.370 inches (9.4 mm)
LM 10 0.055 inches (1.4 mm)
LM 16 0.406 inches (10.3 mm)
LM 20 0.406 inches (10.3 mm)
LM 25 0.406 inches (10.3 mm)
LM 01/ 05/10 MODELS
R&M Materials Handling, Inc. | 4501 Gateway Boulevard, Springfield, Ohio 45502 | PH: 1-937-525-5100 | FAX: 1-937-325-5319
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
THICKNESS AS NEW REPLACE WHEN
0.220 inches (5.6 mm)
0.330 inches (8.4 mm)
0.016 inches (0.4 mm)
0.366 inches (9.3 mm)
0.366 inches (9.3 mm)
0.366 inches (9.3 mm)
LM 16/20/25 MODELS
25/73